Olympus PFL-01 Manuale di istruzioni - Pagina 14

Sfoglia online o scarica il pdf Manuale di istruzioni per Camera Accessories Olympus PFL-01. Olympus PFL-01 39. Underwater case for the electronic flash fl-20

Stampa la pagina

2)Connecting the hot shoe cable

Connect the hot shoe cable, provided with this case, between the

TTL cable connector on the inner side of the camera case and the

hot shoe of the camera. Pay attention to the following points:

before inserting the camera into the camera case, loosen and

remove the cap on the TTL cable connector inside the camera

case;

insert the 5-pin connector of the hot shoe cable into the

TTL cable connector inside the camera case;

screw on the hot shoe cable's connector all the way clockwise to

lock the connector firmly;

after inserting the camera, insert the hot shoe unit of the hot

shoe cable all the way into the camera's hot shoe.

The hot show cable can be disconnected by reversing the

connection steps. In the final step, screw the cap back onto the

TTL cable connector inside the camera case until it stops.

CAUTION

: • Pay attention to the position of the 5 pins when

connecting the connectors.

• Do not use excessive force when tightening the lock

dial screw on the cable's connector.

• When the hot shoe cable is not connected, be sure to

put the caps back on the TTL cable connectors.

insert the camera in the camera case;

E-13

turn the lock dial