Olympus PT E06 Manuale di istruzioni - Pagina 14

Sfoglia online o scarica il pdf Manuale di istruzioni per Camera Accessories Olympus PT E06. Olympus PT E06 30. Underwater camera case

Setting of the digital camera

1 Set the automatic pop-up setting of the camera to OFF. The camera's built-in flash is designed to pop

up automatically when shooting under low light or against the sun in any scene mode other than the

AUTO or underwater modes. For details on camera function setup, refer to the camera's instruction

manual.

2 Switch the electronic flash ON before switching the camera ON.

When using the electronic flash, be sure to turn it ON before turning the camera on.

If the automatic pop-up setting of the camera is ON and the camera is set to the scene mode other

than the AUTO or underwater modes, turning the camera ON before turning the electronic flash on

would cause the camera's built-in flash to pop up automatically. Always be sure to turn the electronic

flash ON before turning the camera ON.

CAUTION:

• If the camera's built-in flash pops up while the hot shoe cable is connected to the camera, it will interfere

with the hot shoe cable, either disconnecting it or causing a connection failure.

• When using a slave-type underwater flash from a non-Olympus manufacturer, pop the camera's built-in

flash up before loading it in the Case.

• Once the Case has been sealed, the built-in flash cannot be popped up or stored.

EN 13