Olympus PT-030 Manuale di istruzioni - Pagina 18

Sfoglia online o scarica il pdf Manuale di istruzioni per Camera Accessories Olympus PT-030. Olympus PT-030 44. Underwater case

Advance Test

1. Before installing the digital camera in the Case, immerse the empty

Case to the intended water depth to confirm that there is no water

leakage.

2. Main causes of water leakage are as follows.

The O-ring has not been installed.

A part of the O-ring or the entire O-ring is outside the specified

groove.

O-ring damage, cracks, deterioration or deformation.

Sand, fibers, hair or other foreign matter sticking to the O-ring, O-

ring groove or O-ring contact surface.

Damage to the O-ring groove or O-ring contact surface.

When closing the Case, check for catching of the hand strap and

silica gel after the above causes have been eliminated.

CAUTION

: • The most suitable method for checking water leakage

is to immerse the Case to the intended water depth.

When this is difficult, water leakage also can be

checked at a shallow depth with no water pressure. Do

not feel that this is troublesome, but perform this test.

• If the advance test should show water leakage with

normal handling, stop using the Case and contact

your dealer or an Olympus service station.

E-17