Olympus OEP-5 Manuale di istruzioni - Pagina 21

Sfoglia online o scarica il pdf Manuale di istruzioni per Apparecchiature mediche Olympus OEP-5. Olympus OEP-5 40. Color video printer

Stampa la pagina

3.4 Inspection of the

LCD Panel Display

The LCD panel displays the information and messages

according to the conditions of this instrument.

CAUTION

If an error or warning message is displayed, refer to

"Countermeasures Against Messages" in "7.1

Troubleshooting Guide" in "INSTRUCTIONS

(ADVANCED)", and take the appropriate measures.

Turn the color video printer (OEP-5) ON as

described in "3.1 Inspection of the Power Supply"

on page 14.

Confirm that the LCD panel displays the startup

message and that the display then changes as shown

in Figure 3.17.

For details of each item, refer to "INSTRUCTIONS

(ADVANCED)."

Startup message

Caption display

This field shows "C" when the printed picture is

set to contain a comment (caption).

Input signal display

This field shows the

selected input signal

format (see Table 3.2).

Print quantity display

This field shows the

number of prints.

Memory page display

This field shows the

selected memory page.

Print layout (ZOOM MODE

Settings) display

This field shows the setting of

the print layout (see Table 3.3).

Operation mode display

This field shows the operation mode of this

instrument.The number on the left is the number of

images used in multi-picture printing. Also, in the case of

a printed image with white frame, "F" is displayed on the

right side of the number of images. The number on the

right indicates the current position of the pointer. It is the

location where the image is stored next.

Figure 3.17

Remaining ink ribbon

display

This field shows the

remaining ink ribbon.

Source/Memory display

This field shows "S"

when the source image

is displayed on the

monitor, and shows "M"

when the memory image

is displayed on the

monitor.

Table 3.2

Display

Input signal format

VIDEO

VBS composite video

SVIDEO

Y/C signals

RGB signals (SDTV)

RGB signals (HDTV)

SDAUTO

Auto input detection (for SDTV input)

HDAUTO

Auto input detection (for HDTV input)

SD-SDI

SDI signal (SDTV)

HD-SDI

SDI signal (HDTV)

SSDAUT

Auto SDI signal input detection (for SDTV

input)

HSDAUT

Auto SDI signal input detection (for HDTV

input)

Table 3.3

Display

ZOOM MODE Settings

OFF

OFF (Print normally.)

PART (Only the "4:3" and "5:4" aspect

ratios are available.)

ALL

ALL (Only the "4:3" and "5:4" aspect

ratios are available.)

REMOTE (All aspect ratios are available.

ZOOM MODE activates depending on the

signal being input.)

This setting is for future expansion. Not

used.