Olympus SZX2-RHS Manuale di istruzioni - Pagina 5
Sfoglia online o scarica il pdf Manuale di istruzioni per Apparecchiature di laboratorio Olympus SZX2-RHS. Olympus SZX2-RHS 28. Led four-part ring illuminator system
Stampa la pagina1
Getting Ready
1. The LED Four-Part Ring Illuminator System is a precision instrument. Handle it with care and avoid subjecting it to sudden
or severe impact.
2. Do not use the LED Four-Part Ring Illuminator System where it may be subjected to direct sunlight, high temperatures and
humidity, dust or vibrations (for the operating environment, see Chapter 5, "SPECIFICATIONS" on page 17).
3. Applicable microscopes are as follows.
SZX16
SZX10/7:
Use the SZX-LGR66 adapter.
SZ61/51 series: Use the SZ-LGR66 adapter.
MVX10:
Use the SZX-LGR66 adapter.
STM6 series
Use the SZX-LGR66 adapter.
4. The full illumination performance cannot be manifested when an optional auxiliary objective for the SZ61/51 series or a
low-power objective for the SZX16/10 is used (see pages 13, 1 4 for details).
5. Take the following care when using the STM6 series because measurement accuracy is affected even by slight heat
generation of the LED.
If he intensity of the illumination is expected to be changed widely (minimum
going to take long, keep the illumination in the maximum condition for about an hour before using the system.
6. Variance in phase may be produced due to variance of individual LEDs.
LED FOUR-PART RING ILLUMINATOR SYSTEM
maximum) when the measurement is
2