Axminster 103629 Manuale di istruzioni - Pagina 3

Sfoglia online o scarica il pdf Manuale di istruzioni per Sega Axminster 103629. Axminster 103629 20. 7 inch. engineer series

Stampa la pagina

Warning

1
.
Read and understand the entire instruction manual before operating machine.
2.
Always wear approved safety glasses/face shields while using this machine.
3.
Make certain the machine is properly grounded.
4.
Before operating the machine, remove tie, rings, watches, other jewelry, and roll up sleeves above the
elbows. Remove all loose clothing and confine long hair. Do not wear gloves.
5.
Keep the floor around the machine clean and free of scrap material, oil and grease.
6.
Keep machine guards in place at all times when the machine is in use. If removed for maintenance
purposes, use extreme caution and replace the guards immediately.
7.
Do not overreach. Maintain a balanced stance at all times so that you do not fall or lean against blades
or other moving parts.
8.
Make all machine adjustments or maintenance with the machine unplugged from the power source.
9.
Use the right tool. Don't force a tool or attachment to do a job which it was not designed for.
10. Replace warning labels if they become obscured or removed.
11. Make certain the motor switch is in the off position before connecting the machine to the power supply.
12. Give you work undivided attention. Looking around, carrying on a conversation, and "horse-play" are
careless acts that can result in serious injury.
13. Keep visitors a safe distance from the work area.
14. Use recommended accessories; improper accessories may be hazardous.
15. Make a habit of checking to see that keys and adjusting wrenches are removed before turning on the
machine.
16. Always keep hands and fingers away from the blade when the machine is running.
17. Never hold the material with the saw in the horizontal position. Always use the vise and clamp it
securely.
18. Read and understand warning posted on the machine.
19. Keep the belt guard and wheel covers in place and in working order.
20. Always provide adequate support for long and heavy material.
21. Use a sharp blade and keep machine clean for best and safest performance.
22. Failure to comply with all of these warnings may cause serious injury.
23. This machine is only used for horizontal metal cutting, not vertical woodwork cutting.
1