Alphacom Regency 600 Manuale d'uso - Pagina 11

Sfoglia online o scarica il pdf Manuale d'uso per Telefono Alphacom Regency 600. Alphacom Regency 600 18. Regency range businessphone

11.

Setting up

11.1
11.2
11.3
11.4
11.5

CONNECTING TElEPHONE

The plug at the end of the telephone lead should be connected into a
telephone modular socket.
Warning – the calendar memory may be lost if the telephone is
disconnected from the telephone line.

RINGER vOlUME OFF lO HI SWITCH

Set the Ringer Volume switch on base unit to adjust the ringer the required
volume

RINGER PITCH lOW MED HI SWITCH

Set the Ringer pitch switch on base unit to adjust the ringer the required
tone frequency.

MESSAGE ON/OFF SWITCH

If you are using a compatible switchboard, the message indicator light will
indicate if you have message waiting.
To use the message waiting facility you may need to move the message On/
Off switch (located under the memory card) to the On position. Consult you
switchboard provider for more information.
Warning - if this telephone is not being used on a switchboard, the Message
On/Off switch (located under the memory card) must be in the off position.

THE RECAll MODE SElECTOR SWITCH

If you are connected to TONE dialing exchange, set the switch to the TbR
(Timed break Recall) position to enable you to access certain Network
Services.
If you are connected to a puLSE dialing exchange, set the switch to ELR
(Earth Loop) position as recall has no function on direct lines connected to
such exchanges.(This will avoid the possibility of cutting off your call should
the recall button be pressed accidentally.)
If you are connected to a pAbX, set the switch according to the
requirements of your particular pAbX. If in doubt, consult your pAbX
Instructions or your pAbX maintainer.
9