Axminster 600749 Manuale - Pagina 2

Sfoglia online o scarica il pdf Manuale per Accessories Axminster 600749. Axminster 600749 2. Stylish twist pen kit
Anche per Axminster 600749: Istruzioni (2 pagine)

Stampa la pagina

ASSEMBLY, HINTS & TIPS

1. Layout the parts according to diagram

2. Align the top of the Pen Barrel with the

Pen Clip/Retaining Bush (Internally

threaded), and gently but firmly, press

the Bush home.

3. Screw the Twist Mechanism into

the Pen Clip/Retaining Bush, and

gently overtighten (to hold the Twist

Mechanism in firmly).

4. Carefully align the Top Cap over the

Twist Mechanism and press firmly

together.

Note: It may help if a piece of paper is

put between the Clip flange and the Top

Cap when they are pressed together to

maintain a minute clearance and prevent

the twist action from binding. Leave the

paper in situ, pro tem.

DIAGRAM A

Visit the Knowledge blog 'How To Make A Pen' for hints, tips and videos

knowledge.axminstertools.com/pen-turning

V I E W O U R F U L L R A N G E O F

P E N C A S E S A N D D I S P L A Y B O X E S O N L I N E

5. Screw the Threaded Brass Bush and the

Nib together.

5. Align the assembly carefully with the

bottom of the Pen Barrel and gently

but firmly press together.

Note: It may help if the Threaded Insert

Bush is unscrewed a half turn, before

pressing in that way, the Nib will always

be able to be tightened up to the body.

6. Unscrew the Nib, insert the refill,

overcome the spring pressure and

screw the Nib back onto the body.

Note: If as in Note one. a paper spacer

was put between the Top Cap and the

Clip flange, gentle exercising of the

twisting action should allow the paper

spacer to be worked free.

Axminster Tools, Axminster, Devon, EX13 5PH

A X M I N S T E R T O O L S . C O M

Tips/Hints

• Use a woodworking vice, one handed bar

clamp, arbor press or a dedicated pen

press.

• Press parts together slowly and steadily

• When pressing the parts together,

CHECK the parts are correctly aligned

with each other and straight. If the part

is crooked or misaligned, it will result in

a poor fit or render the pen unuseable.

• When laying out your pen barrel with

the parts, pay careful attention to keep

the pen barrels in the same orientation

as when on the mandrel. i.e. a pen

barrel may have a "top" and "bottom",

now is the time to be certain of the

orientation.