Accumax Spectroline XRP-3000A Manuale rapido - Pagina 2

Sfoglia online o scarica il pdf Manuale rapido per Apparecchiature di laboratorio Accumax Spectroline XRP-3000A. Accumax Spectroline XRP-3000A 8.

6. To change meter display settings (Unit of Measure, Contrast, Backlight or Language) press MAIN, then press

DOWN to select the SETTINGS option, and then press ENTER. Press UP or DOWN until the parameter to be

changed is highlighted, and then press ENTER to select and change that setting by following the screen

prompts.

The AccuMAX is equipped to operate in four languages: English, French, German and Spanish. After selecting

LANGUAGE, the name of the language will change each time UP or DOWN is pressed. When it reaches the

desired language, press EXIT to set and use the language. The language will remain in use until it is set to

another language.

7. Access higher-level operations such as autozeroing and integration through the menu-driven functions. Please

see the Operator's Manual for full details.

8. To turn the meter off, press and hold the ON/OFF button for two seconds. The AccuMAX will display Shutting

Down -NOW- and then go to a blank screen. The meter will automatically shut off after 60 minutes of inactivity,

except when it is in Integration (INTG) mode. Unless the meter is at low-battery status, all user-selectable

parameters will have been saved for future meter operations. Press and hold the ON/OFF button to restart the

meter.

HIGH VISIBLE LIGHT READINGS

Certain black light lamps, including new UV-A LED lamps, have extremely high UV intensities, which can lead

to higher visible light readings. This can sometimes be attributed to naturally fluorescing materials that may be

present on, or part of, meter sensors. Make sure the meter sensors are clean and calibrated properly.

PREVENTATIVE MAINTENANCE

Immediately clean all spilled materials from the unit and wipe dry. Moisten a cloth with soap and water to

clean plastic surfaces and sensor head. The sensor surface should be rinsed with ethanol to remove any

residual soap and contaminants. Whenever possible, avoid exposure or use in areas that are subject to

temperature and humidity extremes, vibration or mechanical shock, dust or corrosive fumes, or strong

electrical or electromagnetic interference. It is recommended that both the sensor detector and the readout

unit be returned to the factory or a recognized Spectroline AccuMAX calibration service center for a complete

overall check and recalibration at least every six or twelve months, depending on your facility's Standard

Operating Procedures. Before returning the units to our factory, contact the Customer Service Department for

shipping instructions.