AccuMed 160401 Istruzioni
Sfoglia online o scarica il pdf Istruzioni per Prodotti per la cura della persona AccuMed 160401. AccuMed 160401 2. Ovulation test strip
Anche per AccuMed 160401: Istruzioni (2 pagine)
One Step Ovulation Test Strip Instruction Insert
Please read all the information in this Insert before performing
the test.
The One Step Ovulation Test Strip is an in vitro diagnostic test
device intended for the rapid detection of the human Luteinzing
Hormones (LH) in urine to predict when there is a LH surge, and
in turn, when you are likely to ovulate. You can easily carry out
this test yourself.
It is intended for over-the-counter (OTC) use.
For in vitro diagnostic use only.
HOW DOES IT WORK?
The LH (Luteinizing Hormone), which is in the urine of women,
will increase dramatically in the middle of the menstrual cycle.
The LH increase triggers ovulation which is when the eggs are
released periodically from normal fertile women. WHO experts
state that LH testing is a reliable way to detect ovulation.
Ovulation will occur after 24-48 hours following a positive test.
CONTENT OF THE TEST KIT
1. One pouch containing a test strip.
2. Insert with instructions for use.
WHAT ELSE DO YOU NEED?
1. A clean, dry, plastic or glass container to collect the urine.
2. Timer or clock.
PRECAUTIONS
1. This kit is for external use only. Do not swallow.
2. Discard after first use. The test strip cannot be used more
than once.
3. Do not use the test after the expiration date printed on the foil
pouch.
4. Do not use the kit if the pouch is punctured or not well sealed.
5. Keep out of the reach of children.
STORAGE AND STABILITY
1. Store at 39° F to 86° F (4º C to 30º C) in the sealed pouch up to
the expiration date.
2. Keep away from direct sunlight, moisture, and heat.
3. DO NOT FREEZE.
4. You should perform the test soon after opening the pouch.
You should keep the test in a dry environment before use.
WHEN TO COLLECT URINE FOR THE TEST?
The length of the menstrual cycle is the duration from your first
menstrual bleeding day to the day before the next bleeding
begins. Determine the length of menstrual cycle before testing.
Please refer to the chart below to determine when you should
start testing. If your cycle is shorter than 21 days or longer than
38 days, consult a physician.
If you do not know your cycle length, you may begin the test 11
days after your first period since the average cycle length is 28
days. Perform 1 test each day over a 5 days period, or until the
LH surge has been detected.
Cycle Length
21
22
23
24
25
26
27
28
29
Cycle
Chart
30
31
32
33
34
35
36
37
38
39
40
HOW TO COLLECT URINE?
Urine specimens may be collected in any clean, dry, plastic or
glass container.
HOW TO DO THE TEST?
1. The test strip and urine have to be at room temperature
59-86º F (15-30° C) for testing.
2. Remove the test strip from the sealed pouch.
3. Immerse the strip into the urine with the arrow pointing
towards the urine. Take the strip out after 3 seconds and lay the
Day of Cycle
to Begin Testing
days
day
days
day
days
day
days
day
days
day
days
day
days
day
days
day
days
day
days
day
days
day
days
day
days
day
days
day
days
day
days
day
days
day
days
day
days
day
days
day
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24