Axon Synapse HDR07 Manuale tecnico - Pagina 13
Sfoglia online o scarica il pdf Manuale tecnico per Amplificatore Axon Synapse HDR07. Axon Synapse HDR07 18. Re-clocking hdsdi distribution amplifiers
Stampa la paginaIntroduction
What is the Goal of
an event?
HDR07 Events
Announcements
Signal_Input
PLL_State
What information is
available in an
event?
7 Events Menu
An event is a special message that is generated on the card
asynchronously. This means that it is not the response to a request
to the card, but a spontaneous message.
The goal of events is to inform the environment about a changing
condition on the card. A message may be broadcast to mark the
change in status. The message is volatile and cannot be retrieved
from the system after it has been broadcast. There are several
means by which the message can be filtered.
The events reported by the HDR07 are as follows;
Announcements is not an event. This item is only used for
switching the announcement of status changes on/off. 0=off, other
=on.
Beware: this does NOT influence the announcement from the
cards within the frame or the announcing of the Frame Status
object. Use the 'Settings' menu items 'Broadcasts' and
'Forwarding' for Announcement propagation on the network.
Signal_Input can be selected between 0 .. 255. 0= no event,
1..255 is the priority setting.
PLL_State can be selected between 0 .. 255. 0= no event,
1..255 is the priority setting.
The message consists of the following items;
1) A message string to show what has happened in text, for
example: "INP_LOSS", "REF_LOSS", "INP_RETURN".
2) A tag that also shows what happens, but with a predefined
number: e.g. 1 (= loss of input), 2 (= loss of reference), 129(=
1+128 = return of input). For a list of these predefined tags see
the table on the next page.
3) A priority that marks the importance of an event. This value is
defined by the user and can have any value between 1 and
255, or 0 when disabled.
4) A slot number of the source of this event.
11