Alphamount APCH01A Manuale di istruzioni
Sfoglia online o scarica il pdf Manuale di istruzioni per Accessori per moto Alphamount APCH01A. Alphamount APCH01A 2. Kid bicycle helmets
Fig. C
5. (Refer to Fig. D)After adjusting the strap to proper length, put the
helmet on your head. The helmet must sit firmly and level on your head.
To lower the front of the helmet to cover your forehead, tighten the
front chin strap and loosen the rear strap. To raise the front, loosen the
front chin strap and tighten the rear strap.
To check for proper tension, put on the helmet and fasten the buckle.
Open your mouth. You should feel the strap pulling against your chin.
Then attempt to pull the helmet off the front or rear. If the helmet
comes off, increase strap tension and examine if thick enough pads are
being used. The helmet should not be able to roll forward or backward
excessively. It should not be possible to remove the helmet without
unfastening the buckle.
Fig. D
Level
6. Final Check
6-1.The important thing to remember is that the helmet should be fitted
snugly. If you can tilt it forward or backward you need to tighten the
strap.The straps should be positioned that they do not cover the ears or
eyes and that the buckle is away from the jaw when correctly fitted.
6-2. It is important to make sure the helmet to fit snugly on your head
and must be fastened to provide maximum protection.
6-3. All adjustments should be checked each time the helmet is worn,
making sure it fits snugly at all times.
Kid Bicycle Helmets Instruction Manual
Model: APCH01B/APCH01A
Thank you for choosing this Alphamount product! At Alphamount we strive to
provide you with the best quality products and services in the industry.
Should you have any issues, please don't hesitate to contact at
[email protected] (US/CA)
V1.0