AccuPel HDG-4 Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Telecomando AccuPel HDG-4. AccuPel HDG-4 11.

HDG-4000 ANALOG/DIGITAL VIDEO CALIBRATION GENERATOR

OSD Menus

User Level

Field – Use the numeric [0-9] buttons followed by the Enter button to enter a luma integer value from 0-

109% for the User Field in the Gray Field group. To restore the original 100% User Field select Factory

and press Enter. Select "Cancel" and press Enter to leave the menu without making any change.

Window – Use the numeric [0-9] buttons followed by the Enter button to enter a luma integer value from

0-109% for the User Window in the Gray Scale group. To restore the original 100% User Window select

Factory and press Enter. Select "Cancel" and press Enter to leave the menu without making any

change.

Checkerboard – Use the numeric [0-9] buttons followed by the Enter button to enter a luma integer

value from 0-109% for the User Checkerboard and User Inverse Checkerboard in the Special group. To

restore the original 50% Checkerboard luma value select Factory and press Enter. Select "Cancel" and

press Enter to leave the menu without making any change.

Color – Use the Up and Down cursor buttons to select the R, G, or B entry field. Use the numeric [0-9]

buttons to enter R, G, or B integer values from 0-109%. Press the Enter button to enter the R, G, B

values as the new color of the User Window and User Field in the Color 75 and Color 100 groups

respectively. The "White" bars in the color bar patterns are also changed to allow comparison with other

known colors. To restore the original 75% gray and 100% white colors select Factory and press Enter.

Select "Cancel" to leave the menu without making any change.

Note: After you Enter the value changing process you can only exit that process by completing a value

entry, by highlighting Factory and pressing Enter to reset the value(s), or by highlighting Cancel and

pressing Enter. After you Cancel or Enter a new value, a "Change" option is highlighted in the menu.

Press Enter to repeat the User value entry process, or press the left cursor button to move to another

menu item.

Note: As you enter digits the digits shift to the left. Press zeros to clear a mis-typed number without

using Cancel to exit the menu.

CVBS/YC – Select 0 IRE or 7.5 IRE black level setup for NTSC (480i) CVBS or Y/C signals.

Channels – Enable/disable any combination of RGB or YCbCr (YPbPr) output signals.

CVBS C BW – Select the CVBS (composite video) chroma signal bandwidth.

YC C BW – Select the Y/C (S-video) chroma signal bandwidth.

Color Matrix – Select standard YCbCr/YPbPr HD/SD Rec. 709/Rec. 601 color-matrix encoding, or

reverse the encoding (HD/SD Rec. 601/Rec. 709).

HD V Rate – Select 59.94 or 60.00 Hz HD signals.

HDG-4 USER MANUAL