Cineo Quantum c80 Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Attrezzature per DJ Cineo Quantum c80. Cineo Quantum c80 13. Ultimate creative lighting tool

Color Space

The Qc80 uses two separate LED engines to

independently generate accurate white light, variable

from 2700K to 6500K, and an extended RGB gamut

for broad saturated color space. The CIE 1931 diagram

below illustrates the Qc80 color space.

Controls

Setup of the Qc80 is can be accomplished either

using the large Red DIM knob with the control and

status displays, or remotely using RDM.

Accessing the Setup Menu

The fi xture can be set up via the control panel as follows the follows:

1. Push and hold the larger Red knob for approximately 3 seconds. The status display will now show the

top level menu options.

2. Turn the Red knob until the desired control selection is highlighted: LOCAL, DMX, RADIO or CALIBRATE.

3. Push the knob again to select menu category.

Local Mode

When LOCAL mode is selected, all functions of the fi xture are managed through the 4 multi colored

rotary encoders and feedback is displayed on the display screens. The Control screen contextually

switches to show the value of each control being adjusted.

RED knob:

Photo-Accurate Dimming

The dimming curve on the Qc80 follows a new strategy that provides relative output levels that

correspond to image capture. Both DMX values and local control levels directly correlate to camera stops

in a meaningful way. The result is extremely predictable light levels within the full output range of the

fi xture.

0-100% dimming is controlled by turning the Red rotary knob. Pushing the knob cycles the output at

these levels: 20%, 40%, 60%, 80% and 100%.

The following table shows the relationship between Local values as they relate to camera stops:

Local Value

(0-100)

20%

40%

60%

80%

100%

% Output increase

100

200

400

800

1600

Stop Increase