Cinetech BSF HYDRA CLEAN Manuale operativo e di manutenzione - Pagina 17
Sfoglia online o scarica il pdf Manuale operativo e di manutenzione per Pulitore a ultrasuoni per gioielli Cinetech BSF HYDRA CLEAN. Cinetech BSF HYDRA CLEAN 20. Motion picture film cleaner
Stampa la paginaERRORS AND WARNINGS
In there are any errors or warning are pending in the system, they will be shown in the upper part of the
screen. Warnings are displayed against the amber background, and errors — against the red
background (see pictures below).
Warning example:
Error example:
The machine disables the "Start" button until any errors are cleared. Some warnings and errors must be
cleared manually. They can be cleared by pressing "RESET ERROR" button (see the picture below).
Other warnings (e.g. solvent level related) will be cleared automatically once the condition is no longer
active.
WARNING
SOLVENT TIMEOUT – TOP UP AND
PRESS RETRY
TENSION FAILED
FILM SLIPPING DETECTED
PLATES POSITIONING FAILED
LEFT TANK TEMP SENSOR FAIL
RIGHT TANK TEMP SENSOR FAIL
Top up solvent and press "Retry" button
Make sure the film is laced correctly and there is no excess
slack
Make sure the pacer roller is clean and not worn
Power down the machine and wait 30 sec. Power up the
machine again. If warning still present, contact the
manufacturer.
ACTION
Page 17 of 20