Cini QSO 900 Istruzioni tecniche - Pagina 5
Sfoglia online o scarica il pdf Istruzioni tecniche per Riscaldatore Cini QSO 900. Cini QSO 900 6. Immersing heater with electronic thermostat
Stampa la paginaVERTICAL INSTALLATION ON THE DRYER
5.7 If you are sure whether you installed the heater and thermostat in accordance with previous
instructions, you can connect the thermostat to the power network, in the socket with grounding.
Cable cross-section in the installation and the type of connection must be appropriate.
5.8 Immediately after the connection to the power network, the thermostat indicators will turn on and
off in an easily discernible sequence, and the indicator marked with a snowflake
temperature indicator
If after 10 seconds after turning on the heater to an electrical installation all indicators flash in the
same regime, there has been an error while installing the thermostat on the heating element. Turn off
the thermostat from the electrical wiring, loosen the screw on the back of the thermostat, remove the
thermostat from the heater and carefully repeat the thermostat installation procedure.
6. USE
If you are sure that you have installed all the elements in accordance with these instructions, you may
plug the cable into the socket with protective grounding. Installation cable cross-section and the type
of connection must be appropriate.
After the self-test, the indicator
in accordance with the procedure described in 4.2.4.2 above.
WARNING
The heater is designated exclusively for direct installation on radiators or towel dryers –heater
power must not exceed 70% of the power in the heating body that incorporates the heater – it is
prohibited to connect the electric heater to power supply if is not completely submerged in
water – it is prohibited to install the heater in heating bodies that are filled with aggressive
fluids.
and the heater operation indicator (3) will remain turned on.
will illuminate. You may choose the wanted temperature range
HORIZONTAL INSTALLATION ON THE RADIATOR
, the