Cino Fuzzyscan Manuale di avvio rapido - Pagina 9

Sfoglia online o scarica il pdf Manuale di avvio rapido per Lettore di codici a barre Cino Fuzzyscan. Cino Fuzzyscan 17. Bluetooth cordless scanner
Anche per Cino Fuzzyscan: Manuale di avvio rapido (17 pagine), Manuale di avvio rapido (15 pagine), Manuale di avvio rapido (17 pagine), Manuale di avvio rapido (17 pagine), Manuale di riferimento rapido (12 pagine), Manuale di avvio rapido (17 pagine)

Establish SPP Slave Connection

Ensure the battery is fully charged and a virtual COM port is available in

your remote host for connecting the scanner. If not, please go to the

folder of "Client Applications" located in Bluetooth Advanced Setting.

Click the "Add COM Port" to add one more Bluetooth COM port.

Power on the scanner within radio range and ensure the status indicator

of scanner gives alternating red and green blinks (in "Uninstall" state).

If the scanner is not in uninstall state, please scan the "Uninstall"

command first. Then scan the "SPP Slave Mode" command, and the link

indicator of scanner will give 3 blue blinks per 2 seconds.

Uninstall

SPP Slave Mode

Execute the Bluetooth Discovery procedure to find all available Bluetooth

device list in your remote host. You will see ''CINO FxxxBT-xxxx'' is

shown in the list if the scanner is successfully discovered already.

Double click the "CINO FxxxBT-xxxx" on the discovered Bluetooth

devices. If the PIN Code or Passkey is requested for security connection,

please enter "00000000" (default setting). You will see "Serial Port on

CINO FxxxBT-xxxx", and double click this SPP service to establish the

onnection between the scanner and the remote host device.

The scanner will give 4 beeps in ascending tone to indicate the radio is

connected. At the same time, the link indicator of scanner will give 1 blue

blink per 2.5 seconds to indicate the scanner is in radio-connected state.

Please note that if the scanner is not connected to the host device within

1 minute, the scanner will go to sleep. You can press the trigger to wake

up the scanner to continue the installation.

The installation procedures vary on different remote host devices,

operating systems and the Bluetooth software drivers. Please consult

your professional IT consultant to obtain necessary support if any

problem has been encountered during the installation processes.