Cino Micro2 Series Manuale di avvio rapido - Pagina 3

Sfoglia online o scarica il pdf Manuale di avvio rapido per Stampante Cino Micro2 Series. Cino Micro2 Series 13.

Stampa la pagina

Installing and Charging the Battery

Ins talling the Battery
1.
Push the battery
door latch
to the left.
4.
Slide the battery pack into
the battery compartment.
Charging the Battery
1. There are four different power plugs packed in power supply kit, choose
the suitable plug for your region and stick it into the receptacle cavity until
it is locked.
1.
2. Plug the AC plug of the power supply
unit into the appropriate AC wall socket.
3. Connect the DC Plug of the power supply unit to the printer.
4. The charging indicator will go on steady red after connecting the power
supply unit if the battery hasn't been fully charged. When the battery is
fully charged, the charging indicator will go off. Please refer to the table
below for the battery status indications by powering on Micro2.
Battery Status Indications (LED1~LED4)
LED1
LED2
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Red
Green
Orange
Red
The new battery has to be fully charged prior to the first use.
2.
Pull up the battery door.
5.
Close the battery door.
LED3
LED4
Green
Green
Red
Green
Green
Red
2~3
Battery Status
More than 90% of battery remains
More than 70% of battery remains
More than 60% of battery remains
More than 50% of battery remains
More than 40% of battery remains
More than 30% of battery remains
More than 20% of battery remains
Less than 20% of battery remains
Less than 10% of battery remains
2
3.
O
pen the battery
6.
Push the battery door
latch to the right.
door.