CIOKS Schizophrenic LINK Manuale
Sfoglia online o scarica il pdf Manuale per Alimentazione CIOKS Schizophrenic LINK. CIOKS Schizophrenic LINK 9. Attaching of cioks link range power supply to a pedaltrain pedal board
Stampa la pagina
CIOKS LINK range power supplies underneath or on top of a Pedaltrain board.
Attaching of CIOKS link range power supply to a Pedaltrain pedal board
Version 1.0 of 21.07.2013
This document should help you to attach a CIOKS link range power supply to a Pedaltrain pedal board.
Considerations before you start
Power supply on top or underneath the pedal board?
The first question is whether you want to have the power supply on top or underneath the board. Top
placement gives you easy access to outlets, settings switch, mains power cord, mains voltage selector
switch and you always have a clear view on the LED indicators showing you the status of all isolated
sections. If there's any kind of faulty situation, like an overload or a shorted cable, you can locate it just by a
glance at the status LEDs. Attaching the unit underneath the board gives you limited access to the
mentioned features since you need to flip your pedal board but gives you more valuable space on top for
your pedals.
Space underneath the pedal board
All CIOKS link range power supplies are 88mm deep. According to information received from John Chandler,
CEO of Pro Stage Gear/Pedaltrain, there should be a minimum 89mm space between the bars/slats below
the pedal boards, allowing accommodating any of CIOKS link range power supplies in the space between.
No modifications or taller feet are needed with Pedaltrain models PT-Jr, PT-1, PT-2, PT-3, PT-PRO or PT-
Grande. If you have one of the small PT-nano or PT-mini, there is not enough high to fit a CIOKS link range
power supply. In case of these two Pedaltrain models you'd have to raise the whole board with ex. taller
feet. Whether you wish top or underneath placement, everything needed to attach the unit to the board is
included with the power supply, no additional screws or mounting kit is in the box.
Flex cables length
When planning where to attach the power supply to your Pedaltrain board in terms left, middle, right you
must take into consideration the lengths of the Flex cables, both those which were included with your unit
and those you can buy additionally. Make sure they all can reach from the right outlet of the power supply
to the input socket of the particular pedal. This consideration is crucial with the bigger pedal boards like the
PT-PRO or PT-Grande. All Flex cable types are available in 30 and 50cm length where type 1 (black, BOSS
standard) and type 4 (green, for Eventides or ex. 24V EHX pedals) are also obtainable in 80cm length. Now
where the new Extension Flex is also obtainable you can get an extra 50cm on any Flex cable to reach the
most far away pedals from the power supply.
AC mains inlet and courtesy AC mains outlet
Please also consider where you wish to have the power supply's AC mains inlet so you easily can plug in the
mains power cord to the unit. Also if you plan to add one more link range power supply and power it from
the courtesy AC mains outlet using the LINK adapter, there should be enough space for this next unit and
the adapter plus a bit extra.
Page 1