Accurate Technology Digi-Stop Manuale d'uso - Pagina 13

Sfoglia online o scarica il pdf Manuale d'uso per Strumenti di misura Accurate Technology Digi-Stop. Accurate Technology Digi-Stop 16. Complete digital stop and fence system for chop saws, radial arm saws, and miter saws

Stampa la pagina

Readout Programming

Several functions of the Digi-Stop readout is user programmable.

following describes what features and functions are available and how to

change the factory defaults to customize your Digi-Stop system..

To enter Programming Mode:

1. Press and hold the

2. The LCD will briefly display: PG on (Programming On), then

Pr 1, (indicating Programming Parameter #1)

3. Release the

4. The value stored in

Once in the Programming Mode:

Moving up parameter list - Momentarily press the

the Programming Parameter list, first displaying the Programming Parameter

number then the currently programmed value.

Moving down parameter list - Press and hold the

press the

UNITS

Increase parameter value - Momentarily press the

displaying a Programming Parameter Value to increase the setting.

Decrease parameter value - Momentarily press the

displaying a Programming Parameter Value to decrease the setting.

Reset parameter value to default setting - Momentarily press the

while displaying a Programming Parameter Value to reset the parameter to the

factory default value.

Exit programming mode - Press and hold the

the

key. The LCD will briefly display: PG oFF (Programming Off),

DATUM

then return to normal operation. NOTE: The system will automatically exit

programming mode after 60 seconds of no key activity.

Accurate Technology DigiStop

UNITS

key

UNITS

Pr1

Press &

Hold

key to move backward through the Programming list.

key then momentarily press the

is displayed.

UNITS

Momentarily

press

key to advance through

UNITS

key and momentarily

OFF

(+)

key while

PLUS

(-)

key while

MINUS

key. Momentarily depress

Page 13 of 16

The

key.

DATUM

key

DATUM