Arcade Guns G-500 Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Controller per videogiochi Arcade Guns G-500. Arcade Guns G-500 20.

Your Arcade Guns™ light guns come to you already configured with the most relevant

default settings which include button assignments (listed above), newest available

firmware, and unique device IDs for each light gun! These default settings are strongly

recommended since the majority of PC and emulator gun games use the trigger as a

left mouse button and reload as a right mouse button. However, if you want to change

the configuration, please be our guest! It is important to know if you do change the guns'

settings, make sure each gun has a different device ID assigned to it when you are

finished. All of these settings can be changed by using the Ultimarc AimTrak software.

We wanted the best and simplest light guns possible, which is why our light guns come

with two buttons and a trigger. We believe this is the best configuration due to the fact

that most PC and arcade gun games only use a single trigger and in some cases one

additional button or pedal. Our light guns have more than enough buttons to play your

favorite shooter games while keeping it uncomplicated just like in the arcade!

Keeping the default settings listed above makes it easy to configure individual shooter

games. Obviously we like to use the trigger for firing our main weapon in a game. Most

games support off screen reload which means when you point the gun away from the

screen and pull the trigger it will reload the gun for you! We like to use the small button

as a secondary weapon such as a rocket launcher or in some games we use it for

ducking/hiding or reloading the gun (a few games don't support off screen reload).

Every game has slightly different requirements but with these light guns you can handle

them all! Finally we use the large button as a start button in most games which can be

used for starting a game, joining a game after you die or skipping cinematic in some

cases. It's really up to you how you want to configure your games to work with these

guns, but we just thought you might want to know how we like to configure ours!

Positioning the IR Sensor Bar

The IR sensor bar (light bar) should be centered on top of your monitor or television. For

the best results place it as close to the top of the picture on the screen as possible. The

light bar WILL NOT WORK if it is placed on the bottom or side of the monitor or TV.

Double sided tape can be used to keep the light bar in place on top of your monitor or

TV. Then plug the light bar's USB cable into an empty USB port on your computer.

Note: We now offer different types of light bars. Our regular cased light bar is

recommended for screen sizes up to 40 inches diagonal; while our new super light bars

work on larger screen sizes. The super light bars are great for large screen TVs and

projectors.

Arcade Guns™ User Manual