Arcam Integrated Amplifier Manuale - Pagina 7
Sfoglia online o scarica il pdf Manuale per Amplificatore Arcam Integrated Amplifier. Arcam Integrated Amplifier 14.
Stampa la pagina
Power amp - Setting up
4
5
+
-
+
R/CH1
L/CH1
230V
SP1
IN
4-16 OHMS
CONTROL
OUT
SP2
POWER INLET
+
-
+
R/CH1
L/CH1
1
2
3
6
7
CONNECTING TO POWER, SPEAKERS, and
OTHER EQUIPMENT
Follow the guidelines for the integrated amplifier in this handbook.
9
PWR AMP IN
Connect this input to the output sockets of your
pre-amplifier or the PRE-AMP OUT sockets of an integrated
ampIifier.
bn
MONO LINK
The integrated amplifier can be adapted to provide two
mono loudspeaker outputs from a single input.
bn
Pull out the U-link
supplied and use it to connect the
LINK OUT sockets together.
Utilising one power amplifier per loudspeaker will enable you
to bi-amplify bi-wireable loudspeakers. This is particularly
beneficial for top quality stereo installations with a separate
pre-amplifier, or for the left, centre and right channel loud
speakers in a five speaker Dolby Pro Logic™ or Dolby
Digital™ system.
Contact your Arcam dealer for more detailed information.
DAISY CHAIN
The power amplifier is capable of driving further power
amplifiers (or any other power amplifier), to drive more
speakers (e.g. those in other rooms or tri-amplified speakers
etc). Connect the extra power amplifier inputs to the LINK
OUT sockets on the power amplifier, left to left, right to right.
DAISY CHAIN WIRING GUIDE
POWER AMPLIFIER
+
R/CH1
-
SP1
IN
4-16 OHMS
CONTROL
OUT
SP2
+
-
R/CH1
POWER AMPLIFIER
+
R/CH1
-
SP1
IN
4-16 OHMS
CONTROL
OUT
SP2
+
-
R/CH1
bn
LINK
-
+
-
CTR/CH3
EXTERNAL
PWR AMP
LINK
CTR/CH3
IN
OUT
SP1
GAIN
GAIN
PWR
L
IN
NORMAL
NORMAL
4-16 OHMS
PRE
R
OUT
SP2
-
+
-
CTR/CH3
LOW
LOW
8
9
bk
bl
bm
P25 REMOTE SWITCHING
By making a connection from the 'control out' socket
3
of the A22 to the 'control in' socket
amplifier you can use the A22 to control the power mode
of the power amplifier. If configured in this way the front
panel power button of the A22 (or remote control standby
button) will switch both amplifiers on or off simultaneously.
This facility allows you to hide the power amplifier out of
sight and still be able to control its functions.
The connecting cable required is a 3.5mm to 3.5mm jack
lead (stereo or mono) and it is possible to connect several
P25 power amplifiers to an integrated A22 by 'daisy chaining'
from 'control out' of one into the 'control in' of the next as
shown in the diagram at the bottom of the page.
bk
bl
THIRD CHANNEL OPTION
,
This option enables you to have a 5 channel amplifier when
used with a suitable integrated amplifier, to create a high
quality Home Cinema setup.
The third channel can be used to drive the centre speaker.
For connection details see DAVE amplifier 'Setting up'.
Please contact your dealer for availability of this module.
Now you have finished 'Setting up', return to the 'User Guide'.
Inputs from Pre-amp
+
+
L/CH1
-
CTR/CH3
EXTERNAL
PWR AMP
LINK
CTR/CH3
IN
OUT
SP1
PWR
IN
L
4-16 OHMS
PRE
OUT
SP2
R
+
-
+
L/CH1
CTR/CH3
+
L/CH1
-
+
CTR/CH3
EXTERNAL
CTR/CH3
PWR AMP
LINK
IN
OUT
SP1
PWR
IN
L
4-16 OHMS
PRE
OUT
SP2
R
+
-
+
L/CH1
CTR/CH3
12
Amplifiers - Technical specifications
TECHNICAL SPECIFICATIONS
Output power (20Hz-20kHz at 0.5%THD)
8ohms, both channels
8ohms, single channel, 1kHz
4ohms, single channel, 1kHz
Harmonic Distortion, 100W, 8Ω at 1kHz
Peak current rating
L/R Crosstalk
Frequency response ± 0.5dB
Input impedance
Input sensitivity
3
INPUTS
of the P25 power
Line inputs:
Sensitivity
Noise (CCIR) ref. rated power
Input impedance
Overload margin
A/V loop input (A/V mode):
Sensitivity
Input impedance
Power amp in:
Sensitivity
bm
,
Input impedance
Phono board (if fitted):
Sensitivity
Noise (CCIR) ref. rated power
Input impedance
Overload margin
OUTPUTS
Pre-amplifier Output:
Nominal output level
Maximum output level
Output impedance
Tape/ AUX output:
Output impedance
Headphones:
Maximum output level into 600Ω
Output impedance
Mains voltage
-
Power consumption(max)
Dimensions W/D/H mm.
Weight net
Weight packed
-
Supplied accessories
E&OE
-
-
INTEGRATED AMPLIFIER
POWER AMPLIFIER
100W
100W
110W
110W
170W
170W
0.02% typical
0.02% typical
±25A
±25A
-80dBV at 1kHz
-
-
10Hz-20kHz
-
7.5kΩ
740mV (Normal Gain)
1.0V (Low Gain)
160mV
-
-100dB
-100dB
10kΩ
-
>30dB
-
680mV
-
7.5kΩ
-
740mV (Normal Gain)
1.0V (Low Gain)
7.5kΩ
-
2.6mV MM, 26µV MC
-
-79dB MM, -73dB MC
-
47kΩ MM, 300Ω MC
-
35dB
-
800mV
-
8V
-
50Ω
-
50Ω
-
8V
8V
100Ω
100Ω
230V ± 12%
230V ± 12%
115V ± 12%
115V ± 12%
800VA (8VA in standby)
800VA (8VA in standby)
430x380x110
430x350x110
10.9 kg
10.6 kg
13.1 kg
12.5 kg
Mains lead
Mains lead
Remote Control Handset
2 x AAA batteries
13