CIPTON CPTN4003 Manuale di istruzioni - Pagina 5

Sfoglia online o scarica il pdf Manuale di istruzioni per Sport e attività all'aperto CIPTON CPTN4003. CIPTON CPTN4003 8. Led light up basketball kit

Rim Light Battery Installation

1. Undo the 2 clasps on the rim lights' attached battery compartment, and open the

compartment.

2. Install 3 AA-sized Alkaline batteries, following the polarity (+/-) diagram in the

compartment. Do not mix old and new batteries, or mix di erent brands or types of

battery.

3. Close the compartment, and lock the 2 clasps.

Rim Light Installation

1. Install batteries according to the instructions above.

2. Mount the battery pack to your backboard using the included 3M™ adhesive

hook-and-loop fastener.

• Peel o one side's adhesive, stick on the battery pack. Press and hold for 1 minute.

• Peel o the other side's adhesive, stick on desired location. Press + hold for 1 min.

3. Secure the lights to the rim by wrapping the included hook-and-loop fastener strips in

tight circles around.

Using the Rim Lights

• Press the button on the outside of the battery pack to turn the rim lights ON.

• Press the button additional times to ip through the di erent modes, and to turn the

lights OFF.

• The rim lights can also be controlled with the included remote control. See the Using

the Rim Lights Remote Control section below for details.

Using the Rim Lights Remote Control

1. Set up and install the rim lights according to the above instructions.

2. Remove the plastic tab sticking out of the bottom of the remote control.

3. Press the remote control buttoms to turn the rim lights ON/OFF, change colors, and

set an automatic shuto timer.

Using the Rim Lights