Arcane SEL MAX Manuale operativo - Pagina 8

Sfoglia online o scarica il pdf Manuale operativo per Sensori di sicurezza Arcane SEL MAX. Arcane SEL MAX 9. Digital hidden camera detector

To turn off the operating device, press and hold the power button until the "Power off" message appears

on the screen, after which the button can be released.

When the USB cable is connected, the device turns off automatically

and switches to battery charging mode.

If the device "freeze" due to a program malfunction for any reason, it is necessary to perform a hardware

reset by pressing a pin through the hole in the housing on the R button - "Reset", "ARCANE" will reboot

and require screen calibration.

Calibration is performed by pressing the sharp end of the stylus (supplied in the

delivery set) into the centers of the "crosshair" of the circles appearing on the

screen.

After each pressing, the image will move sequentially: to the upper right corner,

the lower left corner - to the lower right corner, to the center of the screen.

After successful completion of the calibration, "ARCANE" will automatically enter

the camera search mode.

If necessary, you can enter the screen calibration mode when you turn on

"ARCANE": while the screen logo is on, press and hold your finger on the screen.

ARCANE can be controlled remotely using an Android device via BLUETOOTH. To do this, on your Android

device it is needed to install the application Arcamer in Google Play.

https://play.google.com/store/apps/details?id=com.suritel.arcanh7

With ARCANE turned on, turn on BLUETOOTH on the Android device and run the installed application.

Select the active ARCANE device in the program window.

After connecting to the device, the control screen of the ARCANE will be displayed on the screen of the

Android device.

Turning off and charging of «ARCANE»

Device reset

Touch panel calibration

Device control using BLUETOOTH channel