digico SD10 Manuale d'uso - Pagina 20

Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature di registrazione digico SD10. digico SD10 20. Replacing and cleaning faders
Anche per digico SD10: Manuale (9 pagine)

Stampa la pagina

Chapter 1 - Getting Started

Standard MADI Connections

If you have a standard MADI connection (not a DiGiCo Rack) to your SD10, you can set the SD10 to display the MADI with generic

signal names, i.e. MADI 1, MADI 2.. etc. through to MADI 56 instead of the usual rack style names. The naming does not affect the

signal, but makes routing signals easier.

Select the port to be configured

Auto Conforming for all ports,

individual racks,

or individual cards

Console to Console routing

If two DiGiCo consoles are connected together, it is possible to route audio between them.

Splits & Sharing

In a multi-console system where Racks are connected with MADI and shared between two DiGiCo Consoles, only one of the

consoles can take control of the rack, with respect to Gain, Phantom Power and Pads. To overcome this, it is possible to place the

SD10 into one of 3 states of operation; Isolate, Receive Only or Full Control.

Sharing is configured in the bottom right-hand corner of the window when the Splits & Sharing button is selected:

These three states can be set individually in the right column), on a per-rack basis (middle column), or globally for all shared racks

(left column).

Isolate : The SD10 will not communicate with the rack and therefore any adjustment of input gain or +48V switch will have no

effect on the rack settings

Receive Only : The SD10 will receive the rack's existing settings but will not be able to control the gain etc on the racks.

Full Control : The SD10 will send its settings to the racks and change them accordingly.

1-12

Edit the Port Name here.

Eg. Stage Rack, Local Rack etc...

Select the contents of the bottom-right

corner of the Audio IO window

Select Card Type manually or

using Auto-Conform function,

and edit Group Name

Analogue Line Out

Socket with -10db Pad

Selected Socket Properties

Edit Name and Socket options.