digico AStar Manuale di avvio rapido - Pagina 3

Sfoglia online o scarica il pdf Manuale di avvio rapido per Interruttore digico AStar. digico AStar 4. Remote audio networking hub



A3232 1-4 Four A3232 sockets each capable of 32x32 channels of 96kHz

audio. Each A3232 socket can be connected to up to 2 A168/A164 expanders.

A status LED flashes yellow for Link activity and illuminates red to indicate a

stream error.



AStar For connection to a AStar I/O module in an 4rea4 system. The AStar

connection provides 128x128 channels of audio at 96kHz. A status LED flashes

yellow for Link activity and illuminates red to indicate a stream error.



Vents Ensure good ventilation at the rear of the AStar. Avoid obstruction of

vents while operating. Avoid dirt or liquid ingress.



Power IEC connector for the built-in universal voltage power supply unit.

This accepts voltages from 100 to 240V AC 50/60Hz. Check that you have

received the correct mains lead for your territory.

Installation

The AStar can be used free standing or up to two AStars can be installed in a

1u rack space using our optional rack ear kit which can be ordered from your

DiGiCo dealer:

X-A-19RK-KIT

Cables

Cat5e or higher STP cable is required for AStar and A3232 connections with a

maximum cable length of 100m per connection.

DiGiCo can provide a number of Cat5e and Cat6 cables suitable for use with

the AStar:

Contact your local DiGiCo dealer for more information.

AStar User Guide

AStar/A88GPIO 19" RACK EAR KIT

AP11443 Issue 1