Axxess AX Series Manuale di istruzioni per l'installazione - Pagina 2

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Automobile Accessories Axxess AX Series. Axxess AX Series 8.

From the 16-pin harness with stripped leads to the aftermarket radio:

• Connect the Blue/White wire to the amp turn on wire. This wire must be connected to hear

sound from the factory amplifier.

• Connect the Gray wire to the right front positive speaker output.

• Connect the Gray/Black wire to the right front negative speaker output.

• Connect the White wire to the left front positive speaker output.

• Connect the White/Black wire to the left front negative speaker output.

• Connect the Green wire to the left rear positive speaker output.

• Connect the Green/Black wire to the left rear negative speaker output.

• Connect the Purple wire to the right rear positive speaker output.

• Connect the Purple/Black wire to the right rear negative speaker output.

• Tape off and disregard the following (6) wires, they will not be used in this application:

Blue/Pink, Brown, Green/Purple, Light Green, Orange/White, Red.

CONNECTIONS TO BE MADE

From the AX-TYAMP2-SWC harness to the aftermarket radio:

• Connect the Black wire to the ground wire.

• Connect the Yellow wire to the battery wire.

• Connect the Red wire to the accessory wire.

• Connect the Blue wire to the power antenna wire.

• If the aftermarket radio has an illumination wire, connect the Orange wire to it.

The following (1) wire is for an aftermarket multimedia/navigation radio that requires this wire.

If not required, tape it off and disregard it.

• Connect the Green/Purple wire to the reverse wire.

• If retaining the factory AUX-IN jack, connect the Red & White RCA jacks to the AUX input.

Continue to 3.5mm jack steering wheel control retention