Epson 11880 - Stylus Pro Color Inkjet Printer Manuale di disimballaggio e installazione - Pagina 11

Sfoglia online o scarica il pdf Manuale di disimballaggio e installazione per Stampante Epson 11880 - Stylus Pro Color Inkjet Printer. Epson 11880 - Stylus Pro Color Inkjet Printer 28. Stylus pro11880
Anche per Epson 11880 - Stylus Pro Color Inkjet Printer: Manuale di riferimento rapido (14 pagine), Opuscolo (1 pagine), Opuscolo e specifiche (8 pagine), Manuale di rete (46 pagine), Manuale informativo sul prodotto (10 pagine), Garanzia limitata (12 pagine), Opuscolo e specifiche (7 pagine), Opuscolo e specifiche (8 pagine)

Stampa la pagina

Epson 11880 - Stylus Pro Color Inkjet Printer Manuale di disimballaggio e installazione

Choosing a Place for the Printer

Instructions for placing the printer

❏ Choose a flat and stable location that can

support the printer weight (about 150.5 kg).

❏ Use only an outlet that meets the power

requirements of this printer.

❏ Operate the printer under the following

conditions:

Temperature: 10 to 35ºC

Humidity:

20 to 80% without condensation

Even the conditions above are met, you may

not print properly if the environmental

conditions are not proper for the paper. Be

sure to use the printer where the paper

conditions are met. See the instructions of the

paper for more detailed information.

Keep the printer away from drying, direct

sunlight, or heat sources to maintain the

appropriate humidity.

❏ Leave enough room for easy operation,

maintenance, and ventilation.

See the next section for detailed information

on the space around the printer.

Warning:

❏ Avoid locations that are subject to excessive

heat, poor ventilation, or dust; otherwise, it

may cause smoke or fire.

❏ Avoid locations that are subject to direct

sunlight or near air conditioners.

❏ Do not block the ventilation openings.

❏ Do not place the printer where it is poorly

ventilated.

❏ Do not place the printer on a carpet or

blanket.

❏ Do not cover the printer with a cloth, such

as a blanket or tablecloth, when using the

printer.

❏ Leave at least 30 cm between the back of the

printer and the wall.

❏ Do not place the printer on an unstable

location. Bodily injury may occur if it falls.

Spaces around the printer

Leave adequate room for easy operation,

maintenance, and ventilation as shown below.

(Values in the illustration below are the

minimum.)