Epson 11880 - Stylus Pro Color Inkjet Printer Manuale di disimballaggio e installazione - Pagina 21

Sfoglia online o scarica il pdf Manuale di disimballaggio e installazione per Stampante Epson 11880 - Stylus Pro Color Inkjet Printer. Epson 11880 - Stylus Pro Color Inkjet Printer 28. Stylus pro11880
Anche per Epson 11880 - Stylus Pro Color Inkjet Printer: Manuale di riferimento rapido (14 pagine), Opuscolo (1 pagine), Opuscolo e specifiche (8 pagine), Manuale di rete (46 pagine), Manuale informativo sul prodotto (10 pagine), Garanzia limitata (12 pagine), Opuscolo e specifiche (7 pagine), Opuscolo e specifiche (8 pagine)

Printing on thick paper (0.5 to

1.5 mm)

When you load thick cut sheets (0.5 to 1.5 mm),

such as cardboard, follow the steps below.

Note:

Do not load thick paper (0.5 to 1.5 mm) longer than

728 mm; otherwise, paper jams may occur.

1. Make sure that the printer is on and the roll

paper cover is closed.

2. Press the Paper Source

until Sheet

appears.

3. Make sure that the Paper Check light is on,

and then set the paper lever to the released

position. LEVER RELEASED. LOAD PAPER

appears on the LCD panel.

The paper lever may be locked if REMAINING

PPR SETUP is set to ON: AT ROLL EXCHANGE. In

this case, press and hold the Enter

for 3 seconds to print the barcode, so you can

release the paper lever.

Caution:

Do not set the paper lever to the released

position while the Power light or Pause light

is flashing; otherwise, damage may occur.

button repeatedly

button

4. Open the front cover.

Caution:

Be careful not to touch the cables around the

print head

; otherwise, the printer may be

damaged.

5. Load the sheet into the paper insertion slot so

that the bottom edge of the paper rests behind

the open front cover.

Make sure that the right and bottom edges of

the sheet are straight and in line with the

vertical line.

Note:

Load the sheet vertically, like most magazines.