Epson 1680 - Expression Special Edition Informazioni sul prodotto - Pagina 6

Stampa la pagina

Epson 1680 - Expression Special Edition Informazioni sul prodotto

EPSON Expression 1680

For example, if you're scanning a photograph, select

Flatbed as your Document Source, 24-bit Color (Std)

as your Image Type, and EPSON Stylus Printer

(Photo) as the Destination, if you're sending the scanned

image to an EPSON inkjet printer. If you're using the

optional transparency unit, select TPU for Neg. Film or

TPU for Pos. Film as your Document Source. If you're

using the optional automatic document feeder, select Auto

Document Feeder as your Document Source.

5. Click the Preview button.

Click to define

the scan area

automatically.

A dotted

marquee

frames the

area to be

scanned.

You see a preview of your scan in the window that opens.

6. Click the

Auto Locate button to automatically define

the scan area around the edges of your image. Or adjust the

scan area by positioning the mouse pointer over any of the

eight boxes around the marquee's edge and dragging the

box to resize the marquee.

Click the

Auto Exposure button to automatically set

the highlight, midtones, and shadow exposure.

Generally it's a good idea to use the Auto Exposure

button to obtain the best settings for your scan. If you're

not satisfied with the results, see your electronic

EPSON Expression 1680 Reference Guide for

information about adjusting settings.

If you need to remove color cast from your image, use

the Gray Balance Intensity feature.

7. When you've finished making adjustments, click the Scan

button.

6 - EPSON Expression 1680

The READY light on the front of the scanner flashes while

it's scanning. In a few moments, a scanned image is

imported into your host application's window.

(If the READY light continues to blink, it may indicate an

error condition. See page 4 for more information.)

8. Click Close to close the EPSON TWAIN Pro window and

return to your application.

9. If you want, save your image using the Save or Save As

options from the File menu of your host application.

Using a Network Scanner

Network scanning involves the following steps:

❏ The scanner server must be turned on and running EPSON

Scan Server.

❏ From the client computer, start EPSON TWAIN Pro

Network to establish a connection to the scanner server.

Only one client computer at a time can connect to the

scanner server. (See "Starting EPSON TWAIN Pro

Network" on page 7 for instructions.)

❏ Choose the Image Type, Resolution, and other settings

you want for your scan.

❏ Place your first image on the document table (or in the

optional automatic document feeder or one of the optional

transparency unit's film guides).

❏ Start the scan. Although this can be done from EPSON

TWAIN Pro Network on the client computer, it may be

more convenient to press the scanner's a Start button or to

start the scan from the scanner server. Then you can scan

several images with a single trip to the scanner.

❏ If you want to scan more than one image, place your second

image on the document table and press the scanner's

a Start button again. Repeat this step for every image you

want to scan. (The settings you chose for the first image

apply to these images too.)

❏ When you return to the client computer, your scanned

images appear in the host application's window. Close

EPSON TWAIN Pro Network to end your connection to

the scanner server and allow other client computers to use

the scanner.

Some applications, such as Adobe Photoshop LE,

automatically close the client computer's connection to

the scanner server when you press the a Start button.

You can't use the a Start button to scan multiple images

if you're using these applications.

1/01