Axxess AXTC-FD3 Manuale di istruzioni per l'installazione - Pagina 4
Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Elettronica per autoveicoli Axxess AXTC-FD3. Axxess AXTC-FD3 12. Ford swc (steering wheel control) and data interface 2020-up
Stampa la pagina
1.
If the interface fails to function,
press and release the reset button,
then repeat the programming
process from step 4 to try again.
LED
Reset
Light
Button
QR Code Scan Here
Further troubleshooting steps and information
can be located at:
axxessinterfaces.com/product/AXTC-FD3
AxxessInterfaces.com
TROUBLESHOOTING
2.
At the end of programming the LED light will turn
indicates programming was successful. If the LED light didn't turn
Solid
Green, reference the list below to understand which programming
section the problem may stem from.
LED Light
Solid Green
Slow Red Flash
Slow Green Flash
Solid Red
Note: If the LED light shows
everything programmed correctly), yet the steering wheel
controls don't work, check to ensure that the 3.5mm jack is
plugged in, and also plugged into the correct jack on the radio.
Once corrected, press the reset button, then program again.
© COPYRIGHT 2021 METRA ELECTRONICS CORPORATION
Final LED Feedback
Solid Green
which
Radio
Vehicle
Programming
Programming
Section
Section
Pass
Pass
Fail
Pass
Pass
Fail
Fail
Fail
Solid Green
for Pass (indicating
AXTC-FD3
I N S T A L L A T I O N I N S T R U C T I O N S
Having difficulties? We're here to help.
Contact our Tech Support line at:
386-257-1187
Or via email at:
Tech Support Hours (Eastern Standard Time)
Monday - Friday: 9:00 AM - 7:00 PM
Saturday: 10:00 AM - 7:00 PM
Sunday: 10:00 AM - 4:00 PM
K
®
NOWLEDGE IS
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.edu or call
386-672-5771 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
REV. 10/8/21 INSTAXTC-FD3
P
OWER