DigiDesign 882/20 Manuale di installazione - Pagina 5
Sfoglia online o scarica il pdf Manuale di installazione per Apparecchiature di registrazione DigiDesign 882/20. DigiDesign 882/20 14. I/o audio interface
Stampa la pagina
Using the 882/20 I/O
The 888/20 I/O™ is an 8-channel digital
audio interface which features 20-bit ana-
log-to-digital, and 20-bit digital-to-analog
converters for superior dynamic range, re-
duced noise floor, and the capability to
work with the full 24-bit mixing, editing,
processing, and mastering environment of
Pro Tools.
The 882/20 I/O can be used in two ways:
As a 20-bit Audio Interface for a
Pro Tools 24, or Pro Tools III-PCI system
As a stand-alone 2-channel, 20-bit audio
converter
This User's Guide explains each of the in-
dicators and connectors on the front and
back panels of the 882/20 I/O. It also ex-
plains how to use the 888/20 I/O with a
Digidesign Pro Tools system, as well as
how to use it as a stand-alone 20-bit audio
converter in your studio.
882/20 I/O Interface
The following section explains all of the
connectors and indicators on the front and
back panels of the 882/20 I/O Interface
and how they are used.
882/20 I/O Front Panel
The 882/20 I/O has the following front
panel indicators, moving from left to right:
20
Front panel of the Digidesign 882/20 I/O
1. Power
This switch applies power to the 882/20.
The "I" position is on. The "O" position is
off.
2. Sync Mode
The Sync Mode LEDs indicate which sam-
ple rate clock reference is currently used by
the analog-to-digital converters (ADCs)
and the digital-to-analog converters
(DACs).
Using the 882/20 I/O 1