arcelik O 706 YES Manuale d'uso - Pagina 4
Sfoglia online o scarica il pdf Manuale d'uso per Piano cottura arcelik O 706 YES. arcelik O 706 YES 6.
Stampa la pagina1
Important instructions and warnings for safety and environment
This section contains safety
instructions that will help protect from
risk of personal injury or property
damage. Failure to follow these
instructions shall void any warranty.
General safety
• This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory or mental
capabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance
in a safe way and understand the
hazards involved.
Children shall not play with the
appliance. Cleaning and user
maintenance shall not be made
by children without supervision.
• Installation and repair procedures
must always be performed by
Authorized Service Agents. The
manufacturer shall not be held
responsible for damages arising
from procedures carried out by
unauthorized persons which may
also void the warranty. Before
installation, read the instructions
carefully.
• Do not operate the product if it is
defective or has any visible
damage.
4/EN
• Control that the product function
knobs are switched off after every
use.
Electrical safety
• If the product has a failure, it
should not be operated unless it
is repaired by the Authorized
Service Agent. There is the risk of
electric shock!
• Only connect the product to a
grounded outlet/line with the
voltage and protection as
specified in the "Technical
specifications". Have the
grounding installation made by a
qualified electrician while using
the product with or without a
transformer. Our company shall
not be liable for any problems
arising due to the product not
being earthed in accordance with
the local regulations.
• Never wash the product by
spreading or pouring water onto it!
There is the risk of electric shock!
• ever touch the plug with wet
hands! Never unplug by pulling on
the cable, always pull out by
grabbing the plug.
• The product must be unplugged
during installation, maintenance,
cleaning and repairing procedures.
• If the power connection cable for
the product is damaged, it must
be replaced by the manufacturer,