Epson C11C484001 - Stylus C62 Color Inkjet Printer Informazioni sul prodotto - Pagina 8
Sfoglia online o scarica il pdf Informazioni sul prodotto per Stampante Epson C11C484001 - Stylus C62 Color Inkjet Printer. Epson C11C484001 - Stylus C62 Color Inkjet Printer 10. Epson stylus c62: product information
Anche per Epson C11C484001 - Stylus C62 Color Inkjet Printer: Specifiche tecniche (2 pagine), Inizia qui (2 pagine)
Stampa la pagina
EPSON Stylus C62
Examining the Nozzle Check Pattern
Examine the nozzle check pattern you print. Each black and
colored area should be complete, with no gaps or lines, as
shown below:
❏ If your printout looks okay, you're done.
❏ If any dots or lines are missing (as shown below), clean the
print head again; see the previous section for instructions.
Aligning the Print Head
If your printouts contain misaligned vertical lines, you may
need to align the print head. Your printer must be connected
directly to your computer (not on a network), to use the Print
Head Alignment utility.
1. Make sure the printer is turned on, but not printing, and
letter-size plain paper (not special ink jet paper) is loaded.
Load paper that's at least 8.27 inches (210 mm) wide to
prevent ink from spraying inside the printer and smudging
your printouts.
2. Do one of the following:
❏ Windows: right-click the
the right side of the Windows taskbar. Then click
.
Head Alignment
❏ Macintosh OS 8.5.1 to 9.x: Open the File menu and
choose
Page Setup
button, then click the
button.
❏ Macintosh OS X: Open the
select
EPSON Printer Utility
printer list, click
OK
3. Follow the instructions on the screen to print a test page.
You see the alignment window.
4. On the printed page, select the pattern that shows the two
vertical lines most precisely printed on top of each other.
You may need to use a magnifying glass.
Select one pattern each for rows 1, 2, and 3. Then enter
the number of the best pattern for each row in the
corresponding boxes on the screen.
EPSON Stylus C62
8 -
Status Monitor 3 icon on
or
. Click the
Print
Utility
Print Head Alignment
folder and
Applications
. Select
C62 Series
, and select
Print Head Alignment
5. Click
Realignment
the pattern numbered 8 in each row is the best aligned. If
not, repeat steps 4 and 5.
6. When you're finished, click
Cleaning the Printer
To keep your printer working at its best, you should clean it
several times a year.
1. Turn off the printer, unplug the power cord, and
disconnect the printer cable.
2. Remove all paper, then use a soft brush to clean any dust or
dirt from the sheet feeder.
3. Clean the exterior of the printer with a soft, damp cloth.
4. Clean ink out of the printer's interior with a soft, damp
cloth.
Clean
here
Don't touch the carriage shaft.
Print
Don't touch the gears inside the printer.
Never use a hard or abrasive brush, or alcohol or thinner
for cleaning; they can damage the printer components
and case.
Don't get water on the printer components and don't
spray lubricants or oils inside the printer.
in the
Don't use any cleaning sheets included with special
.
paper; they may jam inside the printer.
10/02
to print another test page. Make sure
.
Finish
Don't touch the carriage shaft