Archery Arch Well 1m Butt Istruzioni

Sfoglia online o scarica il pdf Istruzioni per Cremagliere e cavalletti Archery Arch Well 1m Butt. Archery Arch Well 1m Butt 2. Target stand

Arch Well 1m Butt – Archery Target Stand Instructions

These instructions will set the target centre at ca. 90cm from the ground - a good compromise for Field

Archers/3D archers between having a low target and comfort for pulling arrows.

For target archers the legs should be made longer to reach a target centre of 130cm.

Please note that strong wind can blow the target over and you may want to fix legs to the ground.

We also fashioned a cover from a tarp to protect the target butt from NZs strong UV while not in use.

Material:

Timber:

All timber should be treated 90 x 45 framing.

Front legs: 2 *1400

Top and Bottom beam: 2 * ca. 1000 (read instructions before cutting!)

Rear legs: 2 * 1200

Rear Cross bar: 1 * 1200

Screws:

Pre-drill for all screws!

8 * 14g x 75 Batten Screws

4 screws for rear crossbar, min. 65

2 screws for rear legs that allow swivelling

Other:

Rope ca. 1m

Tools

Drill, Screwdriver, Measuring tape, pencil, 2 to 4 ratchet straps, 2 clamps