Epson C11CH70201 Inizia qui - Pagina 2

Sfoglia online o scarica il pdf Inizia qui per Stampante Epson C11CH70201. Epson C11CH70201 4.

Remove only the yellow tape from each ink cartridge.

Caution:

Do not remove any seals, or ink will leak. Do not touch

the areas shown above. Doing so may prevent normal operation

and printing.

Insert the cartridge in the holder for each color. Press each

cartridge down until it clicks. Make sure all cartridges are

pushed down into place.

Close the ink cartridge cover, then lower the printer cover.

The product starts charging the ink. Ink charging takes

approximately 5 minutes. When you see a completion

message on the product's LCD screen, charging is

complete.

Caution:

Don't turn off the printer or raise the printer cover while

the printer is charging or you'll waste ink.

Note:

• The cartridges included with the printer are designed for

printer setup and not for resale. After some ink is used for

charging, the rest is available for printing.

• As part of setup, your product's serial number will be sent to a

secure Epson server so that you can be eligible to participate

in programs we may offer from time to time, including the

Epson ink replenishment program. You will have a separate

opportunity to consent to participating in such programs.

Load paper

See the online User's Guide for information about loading

capacity, available paper types and sizes, loading envelopes,

and using the rear paper feed slot.

Make sure the product is done charging the ink, then pull

out the paper cassette.

Slide the side edge guides all the way out and set the

front edge guide to the paper size you are using.

Insert paper with the glossy or printable side down.

Note:

Make sure the paper is under the arrow mark for your

paper type and loaded against the front edge of the cassette.

Slide the edge guides against the paper, but not too

tightly.