Epson C382011B - Stylus Pro 7500 Color Inkjet Printer Informazioni sul prodotto - Pagina 11
Sfoglia online o scarica il pdf Informazioni sul prodotto per Stampante Epson C382011B - Stylus Pro 7500 Color Inkjet Printer. Epson C382011B - Stylus Pro 7500 Color Inkjet Printer 13. Epson stylus pro 7000: product information
Anche per Epson C382011B - Stylus Pro 7500 Color Inkjet Printer: Specifiche tecniche (4 pagine), Garanzia (8 pagine)
Stampa la pagina
6. Select the row you chose in step 5 for each pattern (for
example line 8), then click
If you can't make a consistent choice for the patterns as you
look across the width of the paper, choose the average or
most frequent number. Then click the
button and repeat from step 5.
Aligning the Print Head from the Control
Panel
If you don't have the EPSON printer driver installed, you can
align the print head using the control panel.
❏ First you print a series of alignment or adjustment patterns.
❏ Then you determine which numbered row of patterns
(EPSON Stylus Pro 7000) or numbered line or box
(EPSON Stylus Pro 7500) has the best vertical alignment
(smallest gaps). You enter the information on the control
panel to change the print head alignment.
1. Load roll paper in the printer.
2. Press the
button until
SelecType
is displayed.
MENU
3. Press the
button.
Item
display.
If you're using EPSON paper, leave this setting on
If you're using other media, enter the thickness value of the
paper in 0.1 mm increments by pressing the + or − button.
4. Press the
button to save the setting.
Enter
appears on the display.
ADJUST.PATT.=ALL
5. Press the
button to print the full series of alignment
Enter
patterns. Each pattern consists of 7 numbered rows
(EPSON Stylus Pro 7000) or a series of 15 numbered lines
or boxes (EPSON Stylus Pro 7500).
If you want to print a single alignment pattern, press the +
or − button until the pattern number appears. Then press
the
button.
Enter
After you have printed all the patterns, you need to check
them carefully to determine which row in each set (or
numbered line or box in each row) has the smallest gaps.
Refer to the examples on page 10 and continue with the
following steps to complete the alignment procedure.
6. Do one of the following:
❏ For the EPSON Stylus Pro 7000, examine pattern #1
(or the pattern you printed) and determine which row
of lines has the smallest gaps.
❏ For the EPSON Stylus Pro 7500, examine row #1 (or
the row you printed) and determine which line or box
number has the smallest gaps.
.
Finish
Realignment
HEAD ALIGNMENT
appears on the
PAPER THICK=STD
7. Check the control panel display.
❏ For the EPSON Stylus Pro 7000, it shows
indicating that row 4 is selected for pattern #1.
❏ For the EPSON Stylus Pro 7500, it shows
indicating that line 8 is selected for row #1.
8. Use the + or − button to select the best aligned row for
pattern #1. Then press the
setting.
9. Repeat steps 6 to 8 for each pattern or row you printed.
If you can't make a consistent choice as you look across the
width of the paper, choose the average or most frequent
number, then print the pattern again. Press
through the patterns until you reach the one you want to
repeat.
After you have registered all the patterns, press the
button to exit print head alignment mode and return to
normal printer operation.
Transporting the Printer
When you need to ship your printer, you should repack it
using the original box and packing materials. Follow these
.
STD
steps to drain the ink and prepare the printer for transport:
Caution:
To avoid spilling ink inside the printer during transportation, make
sure you remove the cartridges and follow these instructions for
draining the ink lines.
1. Make sure the printer is turned on. Then remove all the ink
cartridges.
2. Make sure the paper set lever is in the secured position and
the lower cover is closed. Then press the
turn off the printer.
The print head moves to the home (far right) position.
TRANSPORT PREP <number> %
and the
Operate
ink is drained. Then the light goes off and the printer shuts
down.
3. Remove the power cord, interface cable, roll paper spindle,
and all paper or other media.
4. Push in the paper guides if necessary.
5. Install the carriage shipping restraint (packaging material).
8/00
EPSON Stylus Pro 7000 series
button to register the
Enter
Enter
Power
appears on the display
light flashes for a few minutes while the
EPSON Stylus Pro 7000 series - 11
,
#1 = 4
,
#1 = 8
to cycle
Pause
button to