Epson DFX 8000 Informazioni sul prodotto - Pagina 4

Sfoglia online o scarica il pdf Informazioni sul prodotto per Stampante Epson DFX 8000. Epson DFX 8000 8. Product support bulletin(s)
Anche per Epson DFX 8000: Manuale di disimballaggio e installazione (31 pagine), Bollettino di assistenza prodotti (20 pagine), Bollettino di assistenza prodotti (5 pagine), Bollettino di assistenza prodotti (3 pagine), Bollettino di assistenza prodotti (14 pagine), Bollettino di assistenza prodotti (25 pagine), Bollettino di assistenza prodotti (16 pagine)

Epson DFX 8000 Informazioni sul prodotto
DFX-8000 DOT-MATRIX PRINTER
Buttons
ON LINE
This button controls the printer's on line status. Press this button to
put the printer on line or take it off line. When the printer is on
line. the ON LINE light is on and the printer can receive and print
data from the computer.
When the printer is in top of form mode, you can press the ON LINE
button to exit the mode without setting a new top of form position.
You can also Press the ON LINE button to exit.tear-off mode. See the
sections on adjusting the top of form position and using short tear-
off in this chapter.
FORM FEED/COPY
When the printer is off line, press this button to advance the paper
to the top of the next page. To adjust the position the paper is fed
to, see the section on adjusting the top of form position in this
chapter. When the
is on line, press this button to select or
printer
cancel copy mode. See the section on printing on
Chapter 2 for more information.
LINE FEED/LOAD
When the printer is off line, you use this button to load
advance the paper after you load it. To advance the paper one line,
press this button once. To advance the paper continuously, hold
down the button.
TEAR OFF
The TEAR Off button feeds the paper to the printer's tear-off edge so
you can tear off your document without losing the paper normally
lost between printing jobs. To use this
finishes
line after your document
button. The printer feeds the paper to the printer's tear-off edge.
After you tear off the document, press the TEAR Off or ON LINE
button to feed the paper back to the top of form position.
If the perforation of your paper does not align exactly with the printer's
tear-off edge, you can use the MICRO FEED buttons to adjust the tear-off
position. See the section on using short tear-off in this chapter.
Never use the TEAR OFF button with labels.
WARNING:
Press the FORM FEED or LINE FEED button instead to feed
the printed labels to a point where you can tear them off.
MICRO FEED
When the printer is off line, the two MICRO FEED buttons advance or
reverse the loaded paper in 1/216th-inch increments.
these buttons to adjust the paper memory, top of form, loading,
printing, and tear-off positions. For more information, see the
sections on using the paper memory and short tear-off features and
adjusting the top of form and printing positions in this chapter.
TOP OF FORM
When the printer is off line, press this button to enter
form mode. You can also use this button to enter paper memory
settings. For more information, see the sections on adjusting the top
of form position and using the paper memory feature in this
chapter.
DFX-8000-4
paper in
special
paper
take the printer off
feature,
printing and press the TEAR Off
Y
can use
OU
exit
or
FRONT/REAR
when the printer is off line. press this button to select the front
rear tractor. If you have been using paper loaded on
first remove the printed output before switching to the other
tractor. When you switch tractors, the printer feeds the paper that
is already loaded backward to the standby position and loads paper
on the newly selected tractor.
WARNING: Never use the FRONT/REAR button when labels
are loaded in the printer. Also, be sure to remove any
more than one page backward through the printer.
WARNING: When you use multi-part
thickness, do not press the TEAR OFF, FRONT/REAR. or
reverse-feeding (bottom) MICRO FEED button or a paper
jam may result. To remove these forms,
supply at a perforation below the front tractor, take the
printer off line, and press the FORM FEED or LINE FEED
button to eject the remaining forms.
or to
Note: To use the paper memory feature, you need to
DIP switches. See the section on changing a DIP switch setting in
this chapter for instructions on how to set a DIP switch.

Setting the DIP Switches,

DIP Switch 1
l-l 1 condwad mode onfotf
I
I
1
4
'DIP Switch
2
of
top
default
5/23/90
one
tractor,
forms that vary in
off the fresh
tear
reset some
ON
I
OFF
I
Sea the mternabonal character
9-Pin Printers
or
3-49
I