FHF Avisa Line XL04 Manuale di avvio rapido - Pagina 2

Sfoglia online o scarica il pdf Manuale di avvio rapido per Apparecchiature di illuminazione FHF Avisa Line XL04. FHF Avisa Line XL04 2. Strobe light

Stampa la pagina

Technical Data

Housing

Colour

Insulation class

Protection degree

Cable gland

Colour

Temperature range

Weight

Operating voltage

Connecting terminals

1. The appliance has been designed for insulation class II and is only to be connected to, and operated with, the specified

voltage. Specifications of polarity must be observed.

2. Ensure that the casing is not damaged.

3. The relevant codes of Practice an Trade Association requirements for save operation must be observed.

4. Live components may be come exposed when covers are opened or parts are removed. Before opening the appliance

for alignment, maintenance, repair or replacement of parts, the appliance must be disconnected from all power sup-

plies. If it is necessary to carry out alignment, maintenance or repair on the open and live device, this is only to be

undertaken by a qualified specialist who has received corres ponding instruction.

5. Capacitors may still be in a charged state even after the appliance has been disconnected from all power supplies.

6. The appliance is only to be operated under the specified ambient conditions and in the specified mode of operation.

Unfavou rable ambient conditions may cause damage to the appliance and put the user's life at risk. Unfavou rable

ambient conditions may be:

• excessive air humidity (>75%, relative, condensing)

• moisture, dust (observe protection class)

• flammable gases, vapours, solvents

• excessively high ambient temperatures (+55 °C)

7. The ambient temperatures must be within the specified range.

8. The appliance is designed for both indoor and outdoor use.

9. The installation and commissioning of the appliance may only be carried out by a qua lified specialist; the same applies

to any repairs with original spare parts. The use of other than original spare parts may cause damage or injury.

10. The appliance has a very intense lighting strength. In order to avoid damage to eyesight, please refrain from looking at

the lamp for any length of time when it is in operation.

Polycarbonate

Red, similar to RAL 2002

IP 65 acc. to IEC 60529

intended for M20 x 1.5 or Self-sealing grommet

red, green, yellow, blue, clear

-25 °C to +55 °C

0.2 kg

24 VDC, 115 VAC, 230 VAC

Clamping capacity 2.5 mm

FHF Funke + Huster Fernsig GmbH

Gewerbeallee 15-19 · D-45478 Mülheim an der Ruhr

Phone +49 / 208 / 82 68-0 · Fax +49 / 208 / 82 68-286

http://www.fhf.de · e-mail: [email protected]

solid conductor / 1.5 mm

User information

stranded conductor

Subject to alterations or errors