CREE LIGHTING Cadiant Manuale di avvio rapido - Pagina 4
Sfoglia online o scarica il pdf Manuale di avvio rapido per Apparecchiature di illuminazione CREE LIGHTING Cadiant. CREE LIGHTING Cadiant 20. Dynamic skylight
Stampa la pagina
2. Sensor Self-calibration for daylight harvesting
3. Learning about the spaces in which they are installed
4. Automatic grouping of the devices based on where
they are installed
This process ranges from a few minutes up to one hour
depending on the number of devices being set up. Please
do not proceed until the device states that OneButton™ is
complete.
4 4
Once the Configuration Tool display indicates that
OneButton™ Setup is complete, press OK
The luminaires and dimmers in the lighting network are
set up and functional. Dimmers will control the luminaires
they're grouped with.
information and daylight harvesting. The SmartCast
Wireless Gateway and SmartCast Touchscreen will not be
fully set up yet.
To ensure the optimal installation, the luminaires and
dimmers should be configured in the final desired zones
and configurations.
If your project requires multiple control zones, use the
Configuration Tool to set them up at this point. It is best to
have these assigned prior
Wireless Gateway to the network.
Configure all zones and fixtures settings before
proceeding.
Please refer to the
SmartCast Wireless Deployment
Guide
for more information.
STEP 2: SET UP THE SMARTCAST WIRELESS GATEWAY
OK to confirm.
Luminaires will share motion
to adding the SmartCast®
®