CREE LIGHTING THE EDGE XPS Transportation Series Istruzioni per l'installazione - Pagina 2

Sfoglia online o scarica il pdf Istruzioni per l'installazione per Luce per esterni CREE LIGHTING THE EDGE XPS Transportation Series. CREE LIGHTING THE EDGE XPS Transportation Series 2.

Stampa la pagina
ELECTRICAL CONNECTIONS
STEP 1:
After the luminaire is installed and positioned correctly, open the
Junction Box Cover on the luminaire by removing the two (2) screws
and set aside.
STEP 2:
Using Listed 90°C minimum rated wire connectors make the following
electrical connections within the junction box:
a. Connect the black luminaire lead to the voltage supply position of
the terminal block.
b. Connect the white luminaire lead to the neutral supply position of
the terminal block.
c. Connect the green ground lead to the green wire position of the
terminal block.
d. If Dimming is an option; connect the violet dimming positive lead
to the supply dimming positive lead.
e. If Dimming is an option; connect the grey dimming negative lead
to the supply dimming negative lead.
HL-OPTION ELECTRICAL CONNECTIONS
LOW MODE (175 mA): 40-160 LEDS
Low Mode is enabled when voltage is applied to Line 1 and Line 2 is de-
energized (0 volts applied).
STANDARD MODE (350 mA): 40-160 LEDS
Standard Mode is enabled when voltage is applied to Line 2 and Line 1 is
de-energized (0 volts applied).
STANDARD MODE (350 mA): 40-120 LEDS
Standard Mode is enabled when voltage is applied to both Line 1 and
Line 2.
HIGH MODE (525 mA): 40-120 LEDS
High Mode is enabled when voltage is applied to both Line 1 and Line 2.
Line 2 - 175mA (140-160 Leds)
Line 1 - 175 mA
Line 2 - 350 mA (20-60 Leds)
ON
OFF
ON
ON (20-60 LEDS)
ON
ON (140-160 LEDS)
LUMINAIRE WIRING: HL-Option luminaire wiring is Phase to
Neutral only. Refer to wiring diagram on the right for the appropriate
connections.
© 2019 Cree Lighting, A company of IDEAL INDUSTRIES. All rights reserved. For informational purposes only. Content is
subject to change. See www.creelighting.com/warranty for warranty and specifications. Cree
trademarks of Cree, Inc. THE EDGE
is a registered trademark of Cree Lighting, A company of IDEAL INDUSTRIES.
®
2 of 2
Drive Current Output
(mA)
OFF
175
ON
350
525
350
BLACK
GREEN
WHITE
VIOLET
GREY
NEUTRAL-WHITE
GROUND-GREEN
L1-BLACK
L2-RED
SUPPLIED BY
®
and the Cree logo are registered
TERMINAL
BLOCK
LINE-BLACK
GROUND-GREEN
NEUTRAL-WHITE
DIM (+) VIOLET
DIM (-) GREY
LUMINAIRE
CORD
J-BOX
WHITE
GREEN
BLACK
RED
SWITCH OR
SENSOR
CUSTOMER
LUMINAIRE
LUMINAIRE
www.creelighting.com
CI367X02R1_B