CREE LIGHTING VSL Series Istruzioni per l'installazione

Sfoglia online o scarica il pdf Istruzioni per l'installazione per Luce per esterni CREE LIGHTING VSL Series. CREE LIGHTING VSL Series 2. Led streetlight

Stampa la pagina
Check inside the lamp
1
?
Troubleshooting
Problem
Possible Cause
The power line is improperly connected.
The power plug is loose.
LEDs stop working
The LED driver malfunctions.
The LED chip is damaged.
The output of the driver is abnormal.
LEDs flash on and off
The LED chip breaks down.
2
DIRECTIVE 2012/19/EU (WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT – WEEE):
Information for users.This product complies with EU Directive 2012/19/EU. The crossed-out
wastebasket symbol on the appliance means that at the end of its useful lifespan, the product
must be disposed of separately from ordinary household wastes. The user is responsible for
delivering the appliance to an appropriate collection facility at the end of its useful lifespan.
Appropriate separate collection to permit recycling, treatment and environmentally compatible
disposal helps prevent negative impact on the environment and human health and promotes
recycling of the materials making up the product. For more information on available collection
facilities, contact your local waste collection service or the shop where you bought this appliance.
3
Solutions
Reconnect the power cable.
Firmly plug the power in.
Replace with new driver.
TECHNICAL INFORMATION
Replace with new LEDs.
Voltage & Frequency: 220-240V - 50/60hz
Power Factor: >0.9
Replace with new driver.
IP Rating: IP66
The fixture equipped with NEMA receptacle has an IP 65. It has been designed for working connected to a NEMA device that must be compliant
Replace with new LED chip.
with the
ANSI C136.41-2013 standard, Without a NEMA device connected the fixture doesn't work.
The IP rating of the fixture without a NEMA device connected is the same of the NEMA receptacle without Shorting Cap, thus IP20.
A dedicated Shorting cap is available as an accessory.
Insulation Class: I or II
Instllation methods: Fixed, outdoor use. Suitable also for indoor application.
TA min/max (°C): -30°C / + 40°C (input power A,B,C)
TA min/max (°C): -30°C / + 35°C (input power D)
Max. weight: 9,2 kg
Risk group 1 UNLIMITED according to IEC 62471:2008
Version 07
Version 06
VSL Series
LED Streetlight
30W/50W/80W/120W/150W
IEC 60598