CREE LIGHTING Stylus ST3-WD Manuale di istruzioni per l'installazione - Pagina 2

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Lanterna CREE LIGHTING Stylus ST3-WD. CREE LIGHTING Stylus ST3-WD 7. Led ambient luminaire, wall mount

Stampa la pagina

TO INSTALL:

Luminaire

Wall Cleats

Luminaire

2 of 7

Phillips Head Screws

Customer Supplied

Junction Box

Wall Cleats

Wall Cleat

Screws

SECTION 1:

WALL MOUNTING-INDIVIDUAL

LUMINAIRE, ST3-WD AND

ST3-WI

CAUTION: It is the installers

responsibility to ensure that the wall

and junction box are structurally

capable of supporting the weight of

the luminaire and luminaire row.

CAUTION: Mounting Cleats are

to be installed with appropriate

anchors supplied by customer.

Mounting cleats are shipped with the

product and should be installed in

accordance with these instructions.

STEP 1:

Remove Wall Cleats from luminaire

by loosening Phillips head screw(s).

See Figure 1.

STEP 2:

Mount Wall Cleats to wall using

customer supplied mounting

hardware. Refer to Mounting Cleat

dimensions shown in Figure 4 on the

next page.

NOTE: Luminaire Feed location must

be centered over customer supplied

recessed junction box. See Figure 2.

STEP 3:

Hang the luminaire on to the Wall

Cleats as shown in Figure 3 and

make electrical connections per

Section 3 "Electrical Connections

into customer supplied junction

box. Tuck the wires into customer

supplied junction box ensuring not to

pinch any wires.

STEP 4:

Lower the bottom of the luminaire

to the Wall Cleats and secure the

luminaire to the Wall Cleats by

tightening screw(s). See Figure 3.

LPN00644X0008A0_A