Architectural Mailboxes 5500 Series Istruzioni

Sfoglia online o scarica il pdf Istruzioni per Arredamento per esterni Architectural Mailboxes 5500 Series. Architectural Mailboxes 5500 Series 2. Mailboxes

Stampa la pagina

Thank you for purchasing this premium mailbox. We know you'll be satisfied with the years of service it will

provide. If you have any questions about how to mount or use this mailbox, or if you need any replacement parts,

please call us directly at (310) 374-5700 or contact us at [email protected].

Mounting Instructions

Your new mailbox comes completely assembled. To begin using your mailbox, it must be properly mounted in accordance

with USPS requirements to facilitate carrier access, described below. You can mount your mailbox on one of the optional

mailbox posts we offer, or you can mount it to a wooden post using the optional 4X4 Adapter (Item 7540).

CUSTOMERS ARE REQUIRED TO CONTACT THE LOCAL POST OFFICE BEFORE INSTALLING THE MAILBOX TO

ENSURE ITS CORRECT PLACEMENT AND HEIGHT AT THE STREET. GENERALLY, MAILBOXES ARE INSTALLED AT

A HEIGHT OF 41-45 INCHES FROM THE ROAD SURFACE TO INSIDE FLOOR OF THE MAILBOX OR POINT OF MAIL

ENTRY (LOCKED DESIGNS) AND ARE SET BACK 6-8 INCHES FROM THE FRONT FACE OF CURB OR ROAD EDGE

TO THE MAILBOX DOOR.

NOTE: The mounting hardware to

attach this mailbox to your post is

not included with this mailbox.

Compatible mounting hardware is

included with our posts.

www.architecturalmailboxes.com

Series 5500 Mailboxes Instructions

For 3" Round In-ground Post (item 7507 or 7516) or Standard In-ground Post (item 5525): Dig a hole deep

enough to allow the box to sit at the specified height, as required by your local post office. The height from the

road level to the mailbox floor is typically between 41 and 45 inches. Make sure the hole is set back from the road

such that the distance from the curb or the road edge to the mailbox face meets local post office requirements,

typically between 6 and 8 inches.

For Standard Surface Mount Post (item 5526): If using j-bolts, dig a hole deep enough to properly support the

box (about 18") and to allow the box to sit at the specified height. If using concrete anchors in preexisting concrete,

make sure the anchor positions allow the box to sit at the specified height. Also, make sure the bolt or anchor

positions allow for the specified set-back, typically 6 to 8 inches from curb.

For Decorative Post (item 7510 or 7513): Refer to the instructions included with the post.

Height per local post

office, typically between

41 and 45 inches to floor.

Set back per local post office,

typically between 6 and 8 inches.

For 3" Round In-ground Post (item 7507 or 7516), or Standard Posts (items 5525 or

5526): Attach the mailbox to the post using the hardware included with the post.

For Decorative Post (item 7510 or7513): Refer to the instructions included with the post.

Note - If you are using a mounting method other than an optional post (items 5525,

5526, 7507, 7510, 7513, or 7516): The mailbox has mounting bolt patterns on the bottom

that are designed to provide adequate mounting strength and stability for long term use. Do

not drill new mounting holes into the mailbox floor. Instead, create a bracket to attach the

mailbox to the post using the existing holes in the mailbox floor. Drilling new holes or

modifying the mailbox in any way may compromise the function, strength or corrosion

resistance of the product.

(310) 374-5700

For 3" Round In-ground Post (item 7507 or 7516) or

Standard In-ground Post (item 5525): Pour the concrete (at

least 1 cubic foot recommended) completely around the post,

making sure the post and mailbox are level and correctly

positioned according to your local post office.

For Standard Surface Mount Post (item 5526): Pour concrete

around j-bolts held in the correct pattern, or install anchors in

the correct pattern into dry concrete.

For Decorative Post (item 7510 or 7513): Refer to the

instructions included with the post.

Rev. C