Digiflex CM430 Manuale di riferimento per l'installatore - Pagina 5

Sfoglia online o scarica il pdf Manuale di riferimento per l'installatore per Convertitore multimediale Digiflex CM430. Digiflex CM430 6. Rs485 lan to ethernet convertor module

Stampa la pagina

CM430 Reset:

The CM430 modules can be factory reset by using a thin screwdriver or paper clip to press the reset switch in the

~2mm hole that is next to the screw on the side of the unit. With the unit powered down, press and hold the reset

switch and then power up, holding the switch closed for for 10 seconds, this will reset the unit back to factory de-

fault.

CM430 Specifications

Part Number:

Operating Voltage:

Module Connection:

(RS485 LAN)

Operating

Environment:

Certification:

Warranty:

Reset Switch

CM430 - RS485 LAN To Ethernet Module

10.5V D.C - 14.5V D.C. @ 250mA Max.

Ethernet Interface: 10 / 100Base-T, Half / Full Duplex

RS485 Signal: 2 wire Data +/-

0˚ to 55˚C RH 5 to 80% at 30˚C non-condensing.

FCC B, CE B

3 years from date of manufacture (return to base).

In the interest of ongoing product development this

document is subject to change without notice.

E&OE

Reset Switch

Inside Hole.

P/N: CM430IRG Rev 1.0

Page

