Creek Audio 4040 A Manuale di istruzioni - Pagina 4

Sfoglia online o scarica il pdf Manuale di istruzioni per Amplificatore Creek Audio 4040 A. Creek Audio 4040 A 13.

Stampa la pagina

DISPLAY

HEADPHONES

RIGHT-HAND KNOB

Volume

Mute

LEFT-HAND KNOB

Power ON

Auto Standby

Input

SETUP MENU

Input

Balance

Treble

Bass

BT Pairing

PA Direct

WARNING

Dimmer

Brightness

Auto Standby

USB Wake On

Info

Reset

Page:

FRONT PANEL CONTROLS AND DISPLAY

Input, volume, and other status messages are shown in the display window. Mute, volume,

auto-standby timer, EQ (bass and treble controls) are also displayed at the top and digital

connection status at the bottom.

The headphone jack socket is on the right side of the display window. When in use the

loudspeaker output will be automatically muted.

Rotate to adjust the VOLUME level from 0 (min) to 70 (max).

Press briefly to MUTE the output and press again to UN-MUTE the output.

Press once to manually power-ON from Standby mode.

Press for 2 seconds to manually enter Standby mode.

Rotate to select three analogue and four digital inputs.

Press once to enter and rotate to access the following options.

Press and select a new input.

Rotate left or right to move the stereo image between speakers.

Select ON to enable EQ (Tone controls). Select OFF to disable EQ. Treble and bass can only

be adjusted when EQ is ON.

Boost or cut treble as required.

Boost or cut bass as required.

Select Bluetooth Input first. Go to Settings on your mobile device and select Creek Audio

4040A.

Select ON to enable PA Direct mode. Select OFF to return to Line 1.

Do not connect a source device to PA Direct without a pre-amp in front to control the

volume level.

Display - Always ON or Auto OFF will turn display off after 20 seconds.

Adjust display brightness.

Adjust to be Always On, Idle 30 mins, Idle 60 mins, or Idle 120 mins.

Select Enabled to wake-up the 4040 A from Standby mode automatically when connected

to a computer or laptop that automatically goes to sleep. Power management may need

adjustment in your PC or laptop BIOS to enable this function. Go to settings for Apple IOS

adjustments.

Press to show model number 4040 A and software revision.

Press to return the amplifier to factory default settings.