Creek Company OUTDOOR DISCOVERY CRAFT ODC 1624 Manuale di istruzioni per il montaggio - Pagina 8
Sfoglia online o scarica il pdf Manuale di istruzioni per il montaggio per Barca Creek Company OUTDOOR DISCOVERY CRAFT ODC 1624. Creek Company OUTDOOR DISCOVERY CRAFT ODC 1624 8. Three man pontoon boat
Stampa la paginaYour ODC Outdoor Discovery Craft is designed to give you many years of service.
IF YOU EVER HAVE ANY QUESTIONS OR PROBLEMS WITH YOUR ODC1624 PLEASE DO NOT
RETURN IT TO THE DEALER YOU BOUGHT IT FROM. PLEASE CONTACT THE CREEK COMPANY
DIRECTLY TOLL FREE AT 1-800-843-8454.WE ARE OPEN M-F 9AM-5PM MOUNTAIN TIME. OR CONTACT US
1. Always wear a US Coast Guard approved personal floatation device when in your ODC 1624.
2. Never float alone.
3. Always check your ODC 1624 air bladders, frame, oar components, and cover for possible damage
before you use your craft.
4. Never use your craft if you suspect the air bladders, frame, oar components, or cover has been damaged.
5. Never over inflate your ODC 1624.
6. Never use your ODC 1624 without the air chambers fully inflated.
1. If your pontoon bladder is losing air, please check that valve assembly and top valve cap are fully seated. Reseat valve
assembly and repeat pontoon inflation instructions.
2. Do not store your ODC1624 in direct sunlight.
3. If you are leaving your ODC 1624 out in the sun for any amount of time, be aware that the heat can increase the
pressure inside the pontoons to a dangerous level. Let some of the air out of the pontoons if the craft will be out of the water
in the sun for any length of time, or if it is stored in a vehicle, etc.
4. A gain in altitude will increase the pressure in the pontoons also. If you are taking your inflated ODC 1624 from
a low elevation to a high elevation, be sure to let some of the air out of it.
5. For short term storage, we recommend you let some air out of your pontoons.
6. For long term storage, we recommend you make sure your ODC 1624 is completely dry, deflated and stored out of
the sunlight in a cool dry area.
7. Repairing bladder, use enclosed patch kit. Fully deflate bladder. Remove safety split-ring from zipperpull and open
zipper in pontoon cover. Remove bladder from inner liner. Identify puncture. Clean and dry area around puncture.
Apply glue to puncture area and patch using applicator straw. Press patch over puncture area. Allow 24 hours to
dry before Inflation.
8. Note: Metal parts may rust and are not covered under warranty.
Accessories are available for your ODC 1624. Ask for them where you bought your ODC 1624.
The Creek Company Ltd. , P O Box 773892, Steamboat Springs, CO 80477
ODC 1624™
OUTDOOR DISCOVERY CRAFT
Please follow inflation instructions and warnings carefully.
VIA E-MAIL AT [email protected].
Wa r n i n g :
Please read and follow carefully.
CARE AND MAINTENANCE:
Or write for a free color catalog and price list.
970-879-5221 • fax 970-879-7577
www.creekcompany.com • email:[email protected]
Specifications and other details subject to change without notice.
TM