Creek Company ODC SPORT LT OUTDOOR DISCOVERY CRAFT Istruzioni per il montaggio - Pagina 4

Sfoglia online o scarica il pdf Istruzioni per il montaggio per Sport e attività all'aperto Creek Company ODC SPORT LT OUTDOOR DISCOVERY CRAFT. Creek Company ODC SPORT LT OUTDOOR DISCOVERY CRAFT 4.

Stampa la pagina

Your ODC Outdoor Discovery Craft

Please follow inflation instructions and warnings carefully.

IF YOU EVER HAVE ANY QUESTIONS OR PROBLEMS WITH YOUR ODC SPORT LT

RETURN IT TO THE DEALER YOU BOUGHT IT FROM. PLEASE CONTACT THE CREEK COMPANY

DIRECTLY AT 970-879-5221.

WE ARE OPEN M-F 9AM-5PM MOUNTAIN TIME. OR CONTACT US VIA E-MAIL AT [email protected].

HIN is located on square tubing of seat support frame member and on right main frame member (See Figure 1)

Your Creek Company Sport LT

original owner. This does not cover damage due to misuse or normal wear and tear.

Please read and follow carefully.

1. Always wear a US Coast Guard approved personal flotation device when in your ODC SPORT LT

2. Never float alone.

3. Always check your ODC SPORT LT

you use your craft.

4. Never use your craft if you suspect the Air Bladders, Frame, Oar Components or Pontoon Covers have been damaged.

5. Never overinflate your ODC SPORT LT

6. Never use your ODC SPORT LT

7. Your ODC Sport LT

is not designed for use in salt water.

1. If your Pontoon Bladder is losing air, please check that Valve Assembly and Top Valve Cap are fully seated. Reseat valve

assembly and repeat pontoon inflation instructions.

2. Do not store your ODC SPORT LT

3. If you are leaving your ODC SPORT LT

pressure inside the Pontoons to a dangerous level. Let some of the air out of the pontoons if the craft will be out of the water in the

sun for any length of time, or if it is stored in a vehicle, etc.

4. A gain in altitude will increase the pressure in the Pontoons also. If you are taking your inflated ODC SPORT LT

low elevation to a high elevation, be sure to let some of the air out of it.

5. For short term storage, we recommend you let some air out of your pontoons.

6. For long term storage, we recommend you make sure your ODC SPORT LT

of the sunlight in a cool dry area.. Do not store your wet ODC SPORT LT

Frame and other component damage.

7. Repairing Bladder, use enclosed patch kit. Identify puncture. Fully deflate Bladder. Clean and dry area around puncture. Apply

glue to puncture area and patch using applicator straw. Press patch over puncture area. Allow 24 hours to dry, before inflating.

8. Note: Metal parts may rust and are not covered under warranty.

9. We recommend the use of electric trolling motors only on your SPORT LT

10. Do not use the Cargo Deck as a Standing Platform. It is not designed for this and may break if used in this capacity.

ODC SPORT LT

OUTDOOR DISCOVERY CRAFT

is designed to give you many years of service.

is guaranteed against defects in material and workmanship for the life of the product to the

Air Bladders, Frame, Oar Components and Pontoon Covers for possible damage before

without the Air Bladders fully inflated.

CARE AND MAINTENANCE:

in direct sunlight.

out in the sun for any amount of time, be aware that the heat can increase the

View instructional video at www.creekcompany.com

Ask for them where you bought your ODC SPORT LT

Creek Company, PO Box 773892, Steamboat Springs, CO 80477

Warning:

is completely dry, deflated and stored out

in freezing temperatures as this may result in

Accessories are available for your ODC SPORT LT

Creek Company Store at www.CreekCompany.com

email: [email protected]

Made in China

Specifications and other details subject to change without notice.

PLEASE DO NOT

from a

, or visit the