Ayra 9000-0021-6275 Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Apparecchio di illuminazione Ayra 9000-0021-6275. Ayra 9000-0021-6275 18. Led light effect

NOTE: Please note that it is not possible to switch to another operating mode if the Slave mode is active on

your fixture!

SHND: Select one of the built-in shows for the music controlled mode. Please note that the Sound State

needs to be deactivated for this function to be used effectively. The Auto mode is a complete light show,

where the user can set a desired speed. For weddings the speed may be set slow and smooth, for disco

applications the user may want to set the speed higher.

SOUN: The sound state shows if the unit's built-in microphone is active or not. It can be enabled or disabled

in the menu with the ON/OFF selection.

SENS: The sensitivity of the built-in microphone is adjustable, in order to optimise the built-in sound-

controlled mode. For example, when your music source (speakers) is placed far away, it is possible to

increase the sensitivity to make sure that the fixture responds to the sound accurately. The sensitivity can be

adjusted from 0 to 100, where 100 is the most sensitive.

LED: LED display on/off. When using this device in a club or theatre, the environment is mostly dark.

Therefore, it is possible to shut off the LED menu display light when it is not in use. The default setting is ON,

which means that the LED display remains on all the time. When OFF is selected, the display will turn off

after it's not used for approximately 1 minute.

DISP: Display flip function. When you invert the display status, the status of the buttons will also change.

From the correct reading position, Menu is always left and Enter is always right. This may be practical if you

mount the device to a wall, for instance, and can not read the status easily.

TEST: When this mode is selected, the unit will test each LED colour, all LED colours together and the mirror

movement. After this, the LED colours are tested again, etc. This process continues until it is disabled

through the menu.

HOUR: Service intervals are primarily used by companies who rent products for all kinds of purposes and

users who use the fixtures frequently. So after a particular number of hours, the fixture is brought in for

service, to check if all components are in good shape and to fix any problems. This function displays the

number of hours that the product has been used.

VER: Displays the firmware version that is installed on the PCB. Users can not upload new firmware to this

fixture.

REST: Resets the fixture without requiring you to remove the power cables or switch the product off.

All information and illustrations shown in this user manual are subject to change without further notice.

User manual version: 1.0

Creation date + author initials: 13-05-2015 RV Revision date + author initials: