Crelling Harness 14 Manuale di avvio rapido - Pagina 2

Sfoglia online o scarica il pdf Manuale di avvio rapido per Sedia a rotelle Crelling Harness 14. Crelling Harness 14 2.

Stampa la pagina

Shoulder Strap 40mm Adjusters.

To loosen or tighten the straps.

The shoulder straps 'slide-fix' onto the push

handles & then pass down to loop onto the

lap belt at either side of the central buckle.

To Extend Straps:

The 40mm Adjusters are slightly spring

loaded to lock the webbing into position.

To release the webbing you need to

squeeze the Adjuster whilst pulling

on the lower webbing strap.

To Tighten Straps

Simply pull the tail-end of

the webbing strap.

The Adjuster will lock the

webbing into position

Pass the end of strap around

the metal tubular frame.

Sea Sure Lever

B/L 560 Lbs / 200 Kg

Duraflex Side Squeeze Buckle

B/L 220 - 208 Lbs

25mm, 40mm & 50mm

(Not suitable for very large patients)

Adult Vehicle 50mm

Press Button Buckle

Steel Safety Buckle

For those passengers who can

unfasten the other buckles

B/L 500 Kg

Model 14 & B78 Fitting Instructions

The groin strap loops over the central lap belt buckle.

Adjust the length by pulling the tail-end of the strap

through the black plastic Adjuster buckle.

Double back & thread the

strap through the slide.

50mm Buckle

B/L 6000 Lbs.

Slide-Fix Method

It is essential for safety purposes that

you thread the end of the strap back

once again through the bottom bar of

the buckle.

The black plastic 3-bar

'Sliplok' slides hold the straps more

securely into position.

Lap belt loops onto the 'tipping levers'

of manual chairs.

For power chair belt

see 'slide-fix' method below.

The groin strap is fixed around the

cross-section of the framework

underneath the wheelchair seat

by using the 'slide-fix' method.

(See instructions below).

Pull the strap & 'tighten' the grip of

the webbing to the metal frame.

Press lever/thumb-catch

to release

Press both sides

simultaneously to release

Simply Press red

button to release

Hold & raise the spring

loaded thumb catch whilst

separating the two sections

of the buckle